SuzukiHayabusa.org

TECHNICAL => ALL MOTOR TALK => Topic started by: jnegron on August 05, 2015, 12:10:14 PM

Title: Cam card info
Post by: jnegron on August 05, 2015, 12:10:14 PM
Anybody has any info on this cam
Megacycle 324-bc2
all I know is the duration of 257 degrees and .443 lift

thanks!

Title: Re: Cam card info
Post by: Ghost-Geezer on August 11, 2015, 06:05:49 PM
Adjustable sprockets?
Title: Re: Cam card info
Post by: Rocketgeezer on August 11, 2015, 09:17:13 PM
Quote from: jnegron on August 05, 2015, 12:10:14 PM
Anybody has any info on this cam
Megacycle 324-bc2
all I know is the duration of 257 degrees and .443 lift

thanks!
Google megacycle cams, didn't get anywhere on websight, you may have to download there catalog
Title: Re: Cam card info
Post by: fvance on August 12, 2015, 09:13:38 AM
You do
Title: Re: Cam card info
Post by: osti33 on August 12, 2015, 12:33:52 PM
Quote from: jnegron on August 05, 2015, 12:10:14 PM
Anybody has any info on this cam
Megacycle 324-bc2
all I know is the duration of 257 degrees and .443 lift

thanks!

The "bc" in the 324-bc2 typically stands for Bob Carpenter. The cams are ground to his spec. Nobody(including megacycle) will likely give you the spec info on the cam. Unless you get it from Bob direct. It's proprietary info and as such is owned by Bob. My advice would be to call Bob and ask him.
Title: Re: Cam card info
Post by: Rocketgeezer on August 12, 2015, 06:18:20 PM
Quote from: osti33 on August 12, 2015, 12:33:52 PM
Quote from: jnegron on August 05, 2015, 12:10:14 PM
Anybody has any info on this cam
Megacycle 324-bc2
all I know is the duration of 257 degrees and .443 lift

thanks!

The "bc" in the 324-bc2 typically stands for Bob Carpenter. The cams are ground to his spec. Nobody(including megacycle) will likely give you the spec info on the cam. Unless you get it from Bob direct. It's proprietary info and as such is owned by Bob. My advice would be to call Bob and ask him.
That would explain not being able to find it :bah: