Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: Reset the Stock cam chain tensioner??????  (Read 5184 times)

Offline bigturbob12

  • Rider
  • ***
  • Posts: 72
  • Gender: Male
  • 270# Heavy Hitter
Reset the Stock cam chain tensioner??????
« on: August 17, 2010, 09:07:53 AM »
Any trick to resetting the stock tensioner? We are lacking a service manual for 08.
Logged
72" Turbo 2008 Busa
RCC Stage2 Kit
Tuned with ECU Editor

70" Turbo 2003 Busa
Heads up Performance Kit
Mitsubishi 20G turbo
Home built Boost fueling with 450cc injectors
ECU tuning done by me on the strip/street

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: Reset the Stock cam chain tensioner??????
« Reply #1 on: August 17, 2010, 10:21:08 AM »
whats your email address? i have an 08 manual on pdf. its not that hard. when you go to put it back in just put a little pressure on it and turn clockwise then counterclockwise and will slowly go in. than when you prime the motor it will put oil pressure against it and tighten it up. not hard at all
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline bigturbob12

  • Rider
  • ***
  • Posts: 72
  • Gender: Male
  • 270# Heavy Hitter
Re: Reset the Stock cam chain tensioner??????
« Reply #2 on: August 17, 2010, 10:28:42 AM »
bryan@dtscom.net

Also i am the guy who bought the aquamist from ebay....nice stuff thanks again.
Logged
72" Turbo 2008 Busa
RCC Stage2 Kit
Tuned with ECU Editor

70" Turbo 2003 Busa
Heads up Performance Kit
Mitsubishi 20G turbo
Home built Boost fueling with 450cc injectors
ECU tuning done by me on the strip/street

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: Reset the Stock cam chain tensioner??????
« Reply #3 on: August 17, 2010, 11:21:59 AM »
oh hey whats up? hope the aquamist is working out for ya. i just sent you the pdf file. let me know if you didnt get it.
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline bigturbob12

  • Rider
  • ***
  • Posts: 72
  • Gender: Male
  • 270# Heavy Hitter
Re: Reset the Stock cam chain tensioner??????
« Reply #4 on: August 17, 2010, 12:20:31 PM »
Got it! thanks alot bro! WI working good i had to get a smaller jet size but so far so good. Motor is out now getting rods and head work but hope to have it back together soon. Best pass on bike before rods with 13#'s was 8.74 at 168mph. hoping for mid to low 8's at 175+ with 20#'s and WI.
Logged
72" Turbo 2008 Busa
RCC Stage2 Kit
Tuned with ECU Editor

70" Turbo 2003 Busa
Heads up Performance Kit
Mitsubishi 20G turbo
Home built Boost fueling with 450cc injectors
ECU tuning done by me on the strip/street

Offline Nem

  • Mad Post Whore
  • ******
  • Posts: 3039
  • Gender: Male
    • BallOutRacing.org
Re: Reset the Stock cam chain tensioner??????
« Reply #5 on: August 17, 2010, 03:11:25 PM »
Can I get that file too?

ultranem@hotmail.com

Thanks!
Logged

RCC Turbos
Bellman Oil Co.
VP Race Fuels
BoostbySmith
Cycle-Tek
Canadian Mike
Power Brokers Racing
Tiger Racing
Shamrock Racing
Rev'd Up Motorsports
Win Racing
Rock Solid
Schnitz Racing

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: Reset the Stock cam chain tensioner??????
« Reply #6 on: August 17, 2010, 04:02:11 PM »
Quote from: Nem on August 17, 2010, 03:11:25 PM
Can I get that file too?

ultranem@hotmail.com

Thanks!

ok you should have gotten it. let me know if you didnt.
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson

Offline TurboGen2

  • Post Whore
  • ****
  • Posts: 959
  • Gender: Male
  • Molon Labe
Re: Reset the Stock cam chain tensioner??????
« Reply #7 on: August 17, 2010, 04:05:19 PM »
i just got a delivery failure. it does this for some reason with certain hotmail accounts. have any other email address i could try to send to?
Logged
When injustice becomes law, Resistance becomes DUTY! -Thomas Jefferson
Pages: [1]   Go Up
« previous next »