SuzukiHayabusa.org
TECHNICAL => GEN II BUSA => Topic started by: Racerxdetroit on June 30, 2010, 01:08:58 PM
-
Took it for a ride for the 1st time last thursday, bike has 234 KM/H on it now
Before
(http://i165.photobucket.com/albums/u52/racerxdetroit/busa1-1.jpg)
(http://i165.photobucket.com/albums/u52/racerxdetroit/busa3-1.jpg)
After
(http://i165.photobucket.com/albums/u52/racerxdetroit/Busabird.jpg)
(http://i165.photobucket.com/albums/u52/racerxdetroit/gbusa0.jpg)
(http://i165.photobucket.com/albums/u52/racerxdetroit/gbusa1.jpg)
(http://i165.photobucket.com/albums/u52/racerxdetroit/gb1.jpg)
(http://i165.photobucket.com/albums/u52/racerxdetroit/gb3.jpg)
(http://i165.photobucket.com/albums/u52/racerxdetroit/gb2.jpg)
(http://i165.photobucket.com/albums/u52/racerxdetroit/gbusa4.jpg)
(http://i165.photobucket.com/albums/u52/racerxdetroit/gb5.jpg)
(http://i165.photobucket.com/albums/u52/racerxdetroit/gbusa2.jpg)
(http://i165.photobucket.com/albums/u52/racerxdetroit/gb4.jpg)
-
Nice ride, glad you got rid of the reflectors :hys:
-
Looks good
-
That's a sick bro! I got one problem.... It's a busa dog... High speeds pull paint off. I hope it's airplane paint !!,lol
-
rode it yet? How is the map we put in the ecu working out?
-
I rode it for the 1st time last Friday and yes the ECM map works great :thumb:, one problem its back in the paint shop cause I pealed the pain off of the right lower fairing. Heat and speed related :hys:, should have it back together today. If ur not busy this weekeng Gregg I will ride over.
-
Oh I got a ticket in Romulus by the airport Gregg.. wasnt to bad 80 in a 70, I beat that ticket I got leaving ur house the Trooper didnt show up.
-
Oh I got a ticket in Romulus by the airport Gregg.. wasnt to bad 80 in a 70, I beat that ticket I got leaving ur house the Trooper didnt show up.
:thumb:
-
This bike is great, seemed small to me when I 1st rode it. Maybe because the ZX14 had such a large dash..lol
-
Nice Job!!!! :thumb: :thumb: :thumb:
-
Nicely done. Another work of art!
-
OMG THAT'S AWESOME :thumb:
-
Thanks!!!
-
Best fabricator i seen in detroit is a guy name FEATHERWEIGHT he does some totally outrageous builds yours is str8 too...
-
Best fabricator i seen in detroit is a guy name FEATHERWEIGHT he does some totally outrageous builds yours is str8 too...
U say that because featherw8 helped you with you bike and u know he is one of my best friends, bust still in the 10yrs at least I have had the best custom bike in the entire metro Detroit area. and I did it myself did have to pay someone to do it for me.. I know a on the sly dig when I see it..
-
Best fabricator i seen in detroit is a guy name FEATHERWEIGHT he does some totally outrageous builds yours is str8 too...
U say that because featherw8 helped you with you bike and u know he is one of my best friends, bust still in the 10yrs at least I have had the best custom bike in the entire metro Detroit area. and I did it myself did have to pay someone to do it for me.. I know a on the sly dig when I see it..
not taking a dig at u racer x, but FLAMES WENT OUT N THE 80'S AND THE PAINT IS OFF BY THE AIR DAM WHO PAINTED THAT? IS HE BLIND? STILL LOOKS GOOD, NOW THAT'S A DIG :hys: :hys: :hys:
-
Best fabricator i seen in detroit is a guy name FEATHERWEIGHT he does some totally outrageous builds yours is str8 too...
U say that because featherw8 helped you with you bike and u know he is one of my best friends, bust still in the 10yrs at least I have had the best custom bike in the entire metro Detroit area. and I did it myself did have to pay someone to do it for me.. I know a on the sly dig when I see it..
not taking a dig at u racer x, but FLAMES WENT OUT N THE 80'S AND THE PAINT IS OFF BY THE AIR DAM WHO PAINTED THAT? IS HE BLIND? STILL LOOKS GOOD, NOW THAT'S A DIG :hys: :hys: :hys:
and stop all this i do my own work bull too........ :hys:
-
LMAO!! You know I do all my own work, when I learn to pain then I will be well rounded as far as cuatomizing. So with that being said my 80's flame job is smokin hot, I took best of show yesterday when u seen me at the custom car/bike show. :hys:
-
LMAO!! You know I do all my own work, when I learn to pain then I will be well rounded as far as cuatomizing. So with that being said my 80's flame job is smokin hot, I took best of show yesterday when u seen me at the custom car/bike show. :hys:
racerxdetroit pay attention, THE BIKE IS SWEET 80'S PAINT N ALL,but at a parking lot in the hood car show come on now, where's the comp? travel to a real show with sponsors n all to truly test your DETOX PROJECT and then, if u bring home the bacon, U FEEL ME BRO :hys: :hys: :hys:
-
LMAO!! You know I do all my own work, when I learn to pain then I will be well rounded as far as cuatomizing. So with that being said my 80's flame job is smokin hot, I took best of show yesterday when u seen me at the custom car/bike show. :hys:
racerxdetroit pay attention, THE BIKE IS SWEET 80'S PAINT N ALL,but at a parking lot in the hood car show come on now, where's the comp? travel to a real show with sponsors n all to truly test your DETOX PROJECT and then, if u bring home the bacon, U FEEL ME BRO :hys: :hys: :hys:
JUST JOKING WITH U DON'T GET ALL SENSITIVE ON ME, PROSTREET N THE HOUSE....
-
:hys: See there you go!!! lol, I have a sensitive side :D
-
nice job! :thumb: :thumb: :thumb:
-
racerx, next time you go out to see Smithabusa let me know if you want someone to ride with you. I've wanted to meet Greg for awhile now, and I've only seen you that time we were on I-75 and did a roll-on :wink: :thumb:
Let me know, I'll PM you my cell if you're interested.
-
and featherweight, was he that guy that used to have a shop on Biddle near Outer Drive? In Ecorse maybe? Had an R1? If so, I've stopped in that shop (when it was still there) a few times, they seemed like decent peeps :thumb:
-
racerx, next time you go out to see Smithabusa let me know if you want someone to ride with you. I've wanted to meet Greg for awhile now, and I've only seen you that time we were on I-75 and did a roll-on :wink: :thumb:
Let me know, I'll PM you my cell if you're interested.
If you are going to see smithabusa let me know. I will ride/drive over too.
-
Will do :thumb:
-
sounds like there is a party at my house :lol:
-
Party? Can I come???
-
Not sure when it is LOL, I didn't know about it til now haha.
Jefro, I haven't forgot about the jacket i need to put up another post on here, sorry been consumed with other stuff and keep forgetting about it.
-
No problem Greg, whenever you get around to it.
-
Not sure when it is LOL, I didn't know about it til now haha.
Jefro, I haven't forgot about the jacket i need to put up another post on here, sorry been consumed with other stuff and keep forgetting about it.
hey smithbusa, iam n mi, where's your shop located at? always nice to know where to get parts close at
-
i dont have a shop, just a room in my basement where i solder widgets LOL. and a pole barn for my toys, but no official shop, i don't wrench on stuff for anyone or anything, just make my products like ecu flashers etc. i live way out in stockbridge in B.F.E. lol
-
i dont have a shop, just a room in my basement where i solder widgets LOL. and a pole barn for my toys, but no official shop, i don't wrench on stuff for anyone or anything, just make my products like ecu flashers etc. i live way out in stockbridge in B.F.E. lol
ok LOL....
-
i don't have a shop, just a room in my basement where i solder widgets LOL. and a pole barn for my toys, but no official shop, i don't wrench on stuff for anyone or anything, just make my products like ecu flashers etc. I live way out in stockbridge in B.F.E. Lil
OK LOL....
Greg I havent been on in a while, I will PM the guys that can actually know how to ride a motorcycle and see if they wanna ride out you way if that's cool? :hys:
Oh buy the why Pro Street Gregg has been to my house and he knows who does the work on my bike!! Me, matter of fact he has helped me out a couple of times. Us guys who work on our own rides dont have a problem with asking for a helping hand when needed.. When are we gonna see this $40K picture on the street sir???? :moped:
-
i don't have a shop, just a room in my basement where i solder widgets LOL. and a pole barn for my toys, but no official shop, i don't wrench on stuff for anyone or anything, just make my products like ecu flashers etc. I live way out in stockbridge in B.F.E. Lil
OK LOL....I HVE EXPLAINED THAT TOO ONCE, DO U NEED TO HEAR IT AGAIN??? IF IT IS ACTION U LOOKIN 4 I HVE 1K LAYING AROUND HERE AND U CAN HVE THE HIT TO THE 330 HOW BOUT THAT X?????
Greg I havent been on in a while, I will PM the guys that can actually know how to ride a motorcycle and see if they wanna ride out you way if that's cool? :hys:
Oh buy the why Pro Street Gregg has been to my house and he knows who does the work on my bike!! Me, matter of fact he has helped me out a couple of times. Us guys who work on our own rides dont have a problem with asking for a helping hand when needed.. When are we gonna see this $40K picture on the street sir???? :moped:
-
TO THE 330 DETOX!!!!! :hys: :hys: :hys: :trb:
-
(http://)(http://i956.photobucket.com/albums/ae48/prostreetbo/Y29udGVudDovL21lZGlhL2V4dGVybmFs-1.jpg)
HERE U GO RACERXDETROIT....
-
I ride my bike do you? looks like a photo shop to me. What the point of having all that bike and it stays in the shop, im just sayin.. :hys: Im about to ride to royal oaks bike night as always if I see u it will be on 4 wheels not 2. :ppcrn: Im done with this you win fastest bike ever,movin along!!
-
I ride my bike do you? looks like a photo shop to me. What the point of having all that bike and it stays in the shop, im just sayin.. :hys: Im about to ride to royal oaks bike night as always if I see u it will be on 4 wheels not 2. :ppcrn: Im done with this you win fastest bike ever,movin along!! i live a charmed life indeed and thankful of it, so i hve a multiple vehicles i drive... the bike is just a bike x not that big of a deal to me, in fact was discussing selling it because PARKING LOT PIMPIN is not my stlye, nor still running to boring royal oak, been there done that, will be at milan letting LUCI LU get loose 4 some cheddar tho u more than welcome if u like the bike runs the number.....
-
bike not in the shop x, it will be at milan no et if u want a look do it fast u will only hve 7 seconds...... :kickass:
-
I ride my bike do you? looks like a photo shop to me. What the point of having all that bike and it stays in the shop, im just sayin.. :hys: Im about to ride to royal oaks bike night as always if I see u it will be on 4 wheels not 2. :ppcrn: Im done with this you win fastest bike ever,movin along!!
[url][/(http://i956.photobucket.com/albums/ae48/prostreetbo/578d46e1.jpg)url]MY GARAGE X FOCUS..... :hys: :hys: :hys:
-
http://i956.photobucket.com/albums/ae48/prostreetbo/b29ca972.jpg[/img] (http://[img width=1024 height=768)
SHE PURDY X....... :drink: :brk:
](http://i956.photobucket.com/albums/ae48/prostreetbo/b29ca972.jpg)SHE PURDY X....... :drink: :brk:
[/url]
-
Nice Bike
-
looks good.. I really like it
-
You did a nice job on that really :thumb:
-
I never did call anyone...been crazy busy this year :shock: