SuzukiHayabusa.org
TECHNICAL => GEN II BUSA => Topic started by: ANTDOG600 on May 25, 2008, 07:48:16 AM
-
:thumb:
-
i had the instructions, but lost them.....
-
http://1gighost.com/hayabusa/k8hayabusamanual.pdf
-
Press and hold the SEL button and turn on the ignition switch and hold for a further 2 seconds or more.
Press the ADJ button to change the light mode (light-blink-no light-light)
Press the SEL button to advance to light brightness selection showing 0 00 000 0000 00000 in the odometer display. Use the ADJ button to select.
Press the SEL button to advance to RPM set and again set using the ADJ button the press SEL to fix the setting.
Hope this helps, Jim
-
begin with plenty of time and patience and possibly a stiff drink. after reading the instructions repeat stiff drink , after a few attempts, order one from boost- by -smith