SuzukiHayabusa.org
TECHNICAL => GEN II BUSA => Topic started by: speedninja on June 02, 2008, 07:44:32 PM
-
Anybody have any feedback on rearsets yet. I have been seeing a lot of Vortex on the 08s. Are they able to be mounted lower than the stock location?
-
RCC has very nice ones..they fit good and work great...the mounting brackets can be reverse so your foot peg can be high for road racing or can be set low for drag racing...alot of adjustability either way...we have them on a race busa and on a street busa..great RCC product....contact Richard..
-
Is it true that the 08' rearsets bolt up just like the Gen1's...if so you could probably run a number of already marketed type rearsets. The bolt pattern looks to be the same.
-
was told the gen 1 will bolt on to the 08...
-
Yeah I did a little research and read that the front part of the frame is the same on the Gen1 and Gen2 Busa, they just changed the subframe for the new tail. I looked at the frame in person and the holes all seem to line up with the ones on my 05. I know this because I was contemplating changing over to the nicer looking rearsets from the newer bikes for my show bike.
-
Anybody have any feedback on rearsets yet. I have been seeing a lot of Vortex on the 08s. Are they able to be mounted lower than the stock location?
come on man... lets c ur new bike...?