SuzukiHayabusa.org

TECHNICAL => ALL MOTOR TALK => Topic started by: prosb on August 04, 2008, 07:03:01 AM

Title: Oil smoke, valve seals changed
Post by: prosb on August 04, 2008, 07:03:01 AM
I just can't figured out what is wrong with this.

Bike was smoking a minute or two after start. Knew that valve seals were broken. Changed them (OEM) and still smokes after start. After night I checked with a flashlight through the intake and all valves was covered with oil and so was pistons too. Just intake valves.

Bike won't smoke longer than a minute. No smoking when rev it up nor when driving it. So I assume that there is still valve guide seal problem. Sooo embarrassing when I warm up the engine at pit. :oops: