SuzukiHayabusa.org
TECHNICAL => GEN II BUSA => Topic started by: antonio1234 on November 09, 2008, 09:47:10 PM
-
This week I am going to be replacing the two pieces of the right side fairing...any tips or advice I can get before I go at it? Thanks in advance!
-
If you want the removal to be easy then remove the inner fairings (under the nose and sides) before removing the outer fairings. When you have the inner fairings removed, then from the inside slip your fingers between the seam of the upper fairing and lowerfairing and push and the fairing will practically fall out without excess pressure on the tabs.................! :thumb:
-
yup or you can spread the inner fairings from the side fairings also...you just have to remove the plastic tab that covers the oilcooler
idk comes off easy like that for me and i dont have to mess around with the inners.....
if that made sense
-
Go to Powersportspro.com and follow the drop boxes till you get to the bike. It shows all the bolts, spacers, and so on. Easy to follow and easy to make sure you haven't missed anything.