SuzukiHayabusa.org
TECHNICAL => GEN II BUSA => Topic started by: 08 BUSA on June 23, 2009, 05:14:38 PM
-
Is there something that I am suppose to do with the connector that connects to the pair valve? I am about to remove the pair valve since I am installing a new exhaust system. I bought some caps. Is there suppose to be gaskets under them? I am guessing the caps go where the reed valves are. Does anybody have instructions on how to remove the pair valve and cap them off?
-
SEARCH BUTTON :idea:
-
Yeah, I tried that. I didn't find any posts that explained step by step instructions.
-
leave pair valve plugged in cap off air box take one of the long hoses and run it from one side of the valve cover to the other and you are done my friend.
-
Thanks. Suzuski, are you talking about connecting a hose between the two covers were the reed valves are?
-
yes on top of the valve cover run one of the longer hoses cut down of coure in between. sorry i should have clarified and leave the electrical part of the apporatice plugged in.
-
What does this mod do? Is it a must with aftermarket pipe? THANKS!!!!
-
What does this mod do? Is it a must with aftermarket pipe? THANKS!!!!
Doubles horse power to like 350HP :P
-
What does this mod do? Is it a must with aftermarket pipe? THANKS!!!!
Doubles horse power to like 350HP :P
ya maybe you should have one of your local yo yos perform the mod for you clown
-
What does this mod do? Is it a must with aftermarket pipe? THANKS!!!!
no you dont have to but on the 08 you have to plug the air box which feeds the valve fresh air so realy no need for the stuff if you dont plug the air box and stop the fresh air going to it it will back fire.