SuzukiHayabusa.org

TECHNICAL => F.A.Q => Topic started by: Mike-Nightrider on November 07, 2009, 01:27:16 PM

Title: FI Light problem after installing a quick-shifter
Post by: Mike-Nightrider on November 07, 2009, 01:27:16 PM

A friend of me has installed a quickshifter on his busa.
It is a Bazzaz BPD QS-4 plug and play quickshifter.
http://www.superbikesupply.com/index.php?method=Detail&ItemsId=26448

The problem is, that the FI flashes after shifting.

The bike is still running when the FI flashes but I think that cant be normal  :?

Did somebody of you have any experience with that kind of quickshifter ?

Thanks in advance, Mike

Title: Re: FI Light problem after installing a quick-shifter
Post by: Cookie on November 07, 2009, 03:04:56 PM

Did you try removing the Bazzaz BPD QS-4 plug and play quickshifter?  :lol:

Sorry,, I had to,, it was just laying there!  :lol:

Title: Re: FI Light problem after installing a quick-shifter
Post by: Mike-Nightrider on November 07, 2009, 05:20:26 PM

Yes, that would help  :hys:

A secound option would be to put a little sticker over the FI Light  :lol:

Title: Re: FI Light problem after installing a quick-shifter
Post by: Mike-Nightrider on November 12, 2009, 02:38:00 PM

Did nobody have an idea how to get rid of the "FI-Light-Problem" ?

Title: Re: FI Light problem after installing a quick-shifter
Post by: GSXRTURBO1 on November 17, 2009, 12:20:59 PM

I would contact Bazzaz, maybe it just needs a diode or something....?  :?

Title: Re: FI Light problem after installing a quick-shifter
Post by: Mike-Nightrider on November 17, 2009, 12:26:48 PM

Quote from: GSXRTURBO1 on November 17, 2009, 12:20:59 PM

I would contact Bazzaz, maybe it just needs a diode or something....?  :?

:thumb:
Yup, I will try to contact bazzaz again.

Title: Re: FI Light problem after installing a quick-shifter
Post by: smithabusa on November 19, 2009, 08:15:39 PM

Using ecu as the kill box or a cycle-tek ignition kill box won't set the fi light :)

Title: Re: FI Light problem after installing a quick-shifter
Post by: Mike-Nightrider on November 20, 2009, 07:17:48 AM

Quote from: smithabusa on November 19, 2009, 08:15:39 PM

Using ecu as the kill box or a cycle-tek ignition kill box won't set the fi light :)

:thumb:
You are right Greg.
As you know Ive installed your/Matts electronics on both of my Hayabusas and never had a problem with that.  :D

The bazzaz quickshifter is on a friends bike and I cant believe that he has so much trouble with it.
It is a plug and play system and very easy to install, but who cares when it makes problems.