SuzukiHayabusa.org
MEMBERS => MEMBER PROJECTS => Topic started by: magus on November 24, 2009, 12:05:01 PM
-
Starting a new build....
secondaries, ice water cooled. Still don't have a 100% plan on all the motor internals... which sponsor has the best prices, and support?
(http://lh5.ggpht.com/_UEzRU8O0hHk/SwwaPF0slII/AAAAAAAABDU/SBr5kOXD4JU/s400/IMG00510.jpg)
(http://lh5.ggpht.com/_UEzRU8O0hHk/SwwaQ4nlukI/AAAAAAAABDg/IEDFHIsVi1s/s400/IMG00513.jpg)
(http://lh3.ggpht.com/_UEzRU8O0hHk/SwwaRn9YkqI/AAAAAAAABDk/zT60F6c3cDM/s400/IMG00514.jpg)
(http://lh3.ggpht.com/_UEzRU8O0hHk/SwwekKx-qDI/AAAAAAAABEQ/QkX0DZElQvM/s400/Dscn0007.jpg)
(http://lh5.ggpht.com/_UEzRU8O0hHk/SwwaS031QqI/AAAAAAAABDo/_ZoYx1NM-fA/s400/IMG00515.jpg)
(http://lh5.ggpht.com/_UEzRU8O0hHk/SwwaT8GdekI/AAAAAAAABDw/PttpUeF-lI0/s400/IMG00517.jpg)
(http://lh4.ggpht.com/_UEzRU8O0hHk/SwwaVreZNDI/AAAAAAAABD8/K87t6FIp9Sw/s400/IMG00520.jpg)
-
sounds like a good start
-
sounds like a good start
:thumb:
And a lot of work..... :wink:
-
(http://lh6.ggpht.com/_UEzRU8O0hHk/S10LrQ9r7RI/AAAAAAAABMk/N4kxOr0iUZ4/s400/IMG00528.jpg)
I also painted the rims blue.. will post pics later
re painted the other busa a brighter green. and painted the gixxer
(http://lh5.ggpht.com/_UEzRU8O0hHk/S10LsUoac7I/AAAAAAAABMs/h7QR2bFmY5A/s400/IMG00562.jpg)
-
what color green is that?
-
Looks good Joe keep the pics coming. :thumb:
-
:thumb: :thumb:
-
what color green is that?
lime Green from napa. they had a bunch of hotrod paint chips I picked it from those
-
(http://lh3.ggpht.com/_UEzRU8O0hHk/S19umRlOlRI/AAAAAAAABNE/fLhUqE0tH0s/s400/IMG00576.jpg)
(http://lh4.ggpht.com/_UEzRU8O0hHk/S19umrrmuCI/AAAAAAAABNI/rDskFnM5uEk/s400/IMG00578.jpg)
-
:thumb:.Very nice
-
Got some new goodies
Promod head studs
(http://lh4.ggpht.com/_UEzRU8O0hHk/S2x0fLCj1MI/AAAAAAAABOQ/ZuOjUjDN5aE/s400/IMG00587.jpg)
Promod main bearing studs
(http://lh3.ggpht.com/_UEzRU8O0hHk/S2x0ff2pJjI/AAAAAAAABOU/7MjdvPcMVrg/s400/IMG00588.jpg)
Crower rods with arp bolts
(http://lh4.ggpht.com/_UEzRU8O0hHk/S2x0ePRjSZI/AAAAAAAABOI/iRy3EZiALfQ/s400/IMG00585.jpg)
-
Ah, crower rods !
Nice stuff. :thumb:
-
what are your plans for the new project...motor bike, nitrous, or turbo?
-
turbo have a ice box and watercooled plenum with secondaries
-
is this gonna be a track bike or just a really fast street bike?
-
If it's gonna a be a street bike it'll be bullet proof! :wink: Nice build!
-
:thumb:
-
paused workin on the bike to paint my s10
(http://lh3.ggpht.com/_UEzRU8O0hHk/S3W3dGetPII/AAAAAAAABPU/juY2tDzSNio/s400/IMG00592.jpg)
(http://lh6.ggpht.com/_UEzRU8O0hHk/S3W3d3AhHKI/AAAAAAAABPc/nwcEaJ1C0oE/s400/IMG00596.jpg)
without clearcoat.
(http://lh3.ggpht.com/_UEzRU8O0hHk/S3W3eav8j2I/AAAAAAAABPk/72I3Q9LEbCA/s400/IMG00598.jpg)
still got to cut and buff and do the bedliner
-
Never could get the frame title transfered. Had to buy another one yesterday :evil:
so I got to take everything back apart and start over... I may go with a high gloss black on the frame instead of the low gloss this time.
here it is before I had to take it apart!
(http://lh6.ggpht.com/_UEzRU8O0hHk/TCJD98tktUI/AAAAAAAABVM/2yhdq9YN1fU/s400/IMG00682.jpg)
-
i live in rock hill sc. near charlotte nc
-
(http://lh3.ggpht.com/_UEzRU8O0hHk/TCJD_wxJbnI/AAAAAAAABVc/wvF5Yuz_CAU/s400/IMG00711.jpg)
All taken apart :cry:
-
(http://lh3.ggpht.com/_UEzRU8O0hHk/TCJD-xqlgxI/AAAAAAAABVU/zlC24kAcsCA/s400/IMG00704.jpg)
New frame cleaned up and painted
-
(http://lh4.ggpht.com/_UEzRU8O0hHk/TCJD_iiLLZI/AAAAAAAABVY/AHLRw3rNud0/s400/IMG00707.jpg)
going back together on new frame
-
(http://lh5.ggpht.com/_UEzRU8O0hHk/S2x0cUOPlJI/AAAAAAAABN4/FNLit85XfAM/s400/IMG00581.jpg)
-
(http://lh3.ggpht.com/_UEzRU8O0hHk/S2x0egw0fkI/AAAAAAAABOM/RDzJcOCfEjE/s400/IMG00586.jpg)
-
(http://lh3.ggpht.com/_UEzRU8O0hHk/TCJD2ruyXlI/AAAAAAAABUY/D0uf1rKRtm0/s400/IMG00630.jpg)
-
(http://lh3.ggpht.com/_UEzRU8O0hHk/TCJD3NF8TCI/AAAAAAAABUc/heoybRCQzCA/s400/IMG00631.jpg)
-
(http://lh6.ggpht.com/_UEzRU8O0hHk/TCJD3xDApkI/AAAAAAAABUg/k9OpSedb0_w/s400/IMG00642.jpg)
-
(http://lh5.ggpht.com/_UEzRU8O0hHk/TCJD6Coy5XI/AAAAAAAABUw/7NV65C63uSw/s400/IMG00647.jpg)
-
(http://lh3.ggpht.com/_UEzRU8O0hHk/TCJD687FZOI/AAAAAAAABU0/oGmwN6uOTTY/s400/IMG00648.jpg)
-
Wainting one the crank to come back from cali
ordered new turbo
-
:) New goodies
(http://lh5.ggpht.com/_UEzRU8O0hHk/TFMggmUrxBI/AAAAAAAABXM/oapUQ0eapMY/s400/IMG00775.jpg)
Refreshed 08 crank
(http://lh6.ggpht.com/_UEzRU8O0hHk/TFMggn3Yk6I/AAAAAAAABXQ/CjuzTyRaM7Y/s400/IMG00776.jpg)
gen 1 turbo pistons
(http://lh6.ggpht.com/_UEzRU8O0hHk/TFMghJiO0xI/AAAAAAAABXU/HtKTZnGGjag/s400/IMG00777.jpg)
-
Still need a turbo :(
-
go for the gt3076r. its a 500hp spec turbo! with your air to water intercooler thats perfect to run with that turbo. make even more if your building it right! i like the gen2 crank. im building my gen2 right now so its going to very interesting to see what numbers you come up with in the end result. :ppcrn:
-
Wössner is a good choice :thumb:
-
Wössner is a good choice :thumb:
Yea I would have gotten wossner rods too but had already mad a purchase befor I heard raving about wossner.... plus I got a pretty good deal
-
go for the gt3076r. its a 500hp spec turbo! with your air to water intercooler thats perfect to run with that turbo. make even more if your building it right! i like the gen2 crank. im building my gen2 right now so its going to very interesting to see what numbers you come up with in the end result. :ppcrn:
what HP are you shooting for?
-
well over 500hp thats for sure. have enough money saved up to buy pistons. now saving up for a set of rods and air to water intercooler plenum, water pump, water tank and cut down radiator for heat exchanger. oh and also the new billet fuel rail with bigger secondary injectors from richard for use with ecu editor and all stock ecu control!
-
well over 500hp thats for sure. have enough money saved up to buy pistons. now saving up for a set of rods and air to water intercooler plenum, water pump, water tank and cut down radiator for heat exchanger. oh and also the new billet fuel rail with bigger secondary injectors from richard for use with ecu editor and all stock ecu control!
You gonna run e-85?
-
yep going to run e85 for out on the streets. hopefully by the time i get done building it PetriK will have the programing done for the ecu to automatically tune for e85 by sensing what the alcohol content is in the tank. all this gen2 ecu stuff is just crazy with what is getting implemented! they are working on an autotuner currently that sees what the air fuel is through innovate lc-1 or dl-32. then recomends what changes should be made and then you select you want the changes done.
-
yep going to run e85 for out on the streets. hopefully by the time i get done building it PetriK will have the programing done for the ecu to automatically tune for e85 by sensing what the alcohol content is in the tank. all this gen2 ecu stuff is just crazy with what is getting implemented! they are working on an autotuner currently that sees what the air fuel is through innovate lc-1 or dl-32. then recomends what changes should be made and then you select you want the changes done.
yea thats how the ms I have is supposed to work.
-
im going to need to get another gen2 so i can have a daily rider and then my all out drag bike. i will ocassionally take it out to the bike nights and such but mostly for drag. my buddy pang from pffabrications makes honda s2000 turbo kits and with the stock internals, gt35r and an a/a intercooler made 605 rwhp on pump e85! i think it was around 29psi too. e85 = government subsidized race fuel!
-
yea I only had one bike when I went stage 1 .. If you can afford I highly recomend a second bike so you don't rush things.
-
Well Life was a bitch for a while...
almost had to sell the project :grn:
shes a lil less of a hag now, so lets see if I can get this fucker done.
-
Nice! What all left do you have to do? Yep I bought another busa about 2 months ago. I'm putting my stage 1 kit on this one for the daily rider and then a race kit on my 08!
-
Nice! What all left do you have to do? Yep I bought another busa about 2 months ago. I'm putting my stage 1 kit on this one for the daily rider and then a race kit on my 08!
everything! I have not touched it at all :td:
I have a post up in the turbo section trying to find out what else I need to finnish the motor.
-
Your number still the same a last? I sent you a text!
-
Give me a buzz about what parts you need!
-
No its
864.923.9118
-
cool
-
Any updates ??