SuzukiHayabusa.org
MEMBERS => MEMBER PROJECTS => Topic started by: quinton1967 on December 21, 2009, 08:36:54 PM
-
(http://i29.photobucket.com/albums/c294/547mt_/001-7.jpg)
-
(http://i29.photobucket.com/albums/c294/547mt_/007-6.jpg)
-
(http://i29.photobucket.com/albums/c294/547mt_/011-3.jpg)
-
(http://i29.photobucket.com/albums/c294/547mt_/009-4.jpg)
-
(http://i29.photobucket.com/albums/c294/547mt_/010-2.jpg)
-
(http://i29.photobucket.com/albums/c294/547mt_/013.jpg)
-
(http://i29.photobucket.com/albums/c294/547mt_/014.jpg)
-
build sheet
stage one upgrade to stage two 3bar map senser
water injection
08 gsxr 1000 wheels macintosh 0 to 9 arm
i still have to go through motor.i did things backwards now out of money
-
(http://i29.photobucket.com/albums/c294/547mt_/007-7.jpg)
my second fan setup
-
I thought that bike had the ultra kit on it??
-
I thought that bike had the ultra kit on it??
its his spare bike
-
i still have that one.i had a stage1 laying around for year found a good deal on a 03 alot of miles so i wont be doing to much boost till i get the motor gone through
-
do you guys see anything i can improve on any suggestion are welcome
-
(http://i29.photobucket.com/albums/c294/547mt_/136.jpg)
-
(http://i29.photobucket.com/albums/c294/547mt_/137.jpg)
i still have pipe and powercommander in the for sale section.then i can buy more stuff
-
(http://i29.photobucket.com/albums/c294/547mt_/022-2.jpg)
i just got my arm today.i have got slow down.wait i have no more :brk:
-
(http://i29.photobucket.com/albums/c294/547mt_/023-2.jpg)
no spacer perfect fit
-
looking good :thumb:
-
Nice! :thumb:
-
thanks iam looking forward to riding it next year.miss that whistle that the stage1and2 have.the ultra kit 35r and the super ultra 40 r sound like big old mean grizzly bear going the street
:lol:
l
-
here's a picture of my grizzly bear
(http://i29.photobucket.com/albums/c294/547mt_/005-1.jpg)
-
Yea I saw that Grizzley lay the smack down @ the dyno shootout @ Flat Out last summer. That's whats up!
-
yeah but that cost me a set of throttle bodies
-
Why what happened?
-
i think what happend is that the throttle was chopped and the air didn't have no were to go.so bent throttle blades. it should of when out the blow off valve.i got a lighter spring in it now. it also back fired. it could have been a lean condition also
-
any updates...........more pics....
-
no iam finish just have to cut fairing. and put high volume oil pump gear in
-
(http://i29.photobucket.com/albums/c294/547mt_/045-1.jpg)
here are my finshed pic.i have more fun riding this bike. than my rcc super ultra bike
-
(http://i29.photobucket.com/albums/c294/547mt_/050.jpg)
-
(http://i29.photobucket.com/albums/c294/547mt_/052.jpg)
-
(http://i29.photobucket.com/albums/c294/547mt_/053-1.jpg)
-
(http://i29.photobucket.com/albums/c294/547mt_/101-1.jpg)
mods iam doin over the winter
rods
pistons
backcut transmission with big out put shaft
65 pound valve springs
cam chain conversion
all new bearings
-
Nice! You gave me some good ideas as to how to mound my water injection kit. :thumb:
-
Nice! You gave me some good ideas as to how to mound my water injection kit. :thumb:
did you ever do that regulator rectifier mod
-
Nice! You gave me some good ideas as to how to mound my water injection kit. :thumb:
did you ever do that regulator rectifier mod
No not yet, I have a million other things going on right now with my build. I still plan on it.
-
(http://i29.photobucket.com/albums/c294/547mt_/imagejpeg_21.jpg)
here some pic of the motor every looks good for almost 30,000 miles
-
(http://i29.photobucket.com/albums/c294/547mt_/securedownload1.jpg)
-
(http://i29.photobucket.com/albums/c294/547mt_/securedownload12.jpg)
-
Nice!!
Where did You get the carbon body panels on the 08 giggy??
-
1carbontech.com i wish they made all the body part
-
(http://i29.photobucket.com/albums/c294/547mt_/imagejpeg_212.jpg)
-
Nice work!
Is this going to be a stretbike or racebike?
Also, why did you go with the roller cam chain? I was under the impression that unless you're pushing out monster boost they're not needed. I'm no expert here so that's why I'm asking.
Jason
-
mostly a street bike maybe some track time.i was going to buy a cam chain anyway so something a little stronger
-
(http://[IMG]http://i29.photobucket.com/albums/c294/547mt_/001-8.jpg)[/img]
here are some up dated pictures
-
[/img](http://i29.photobucket.com/albums/c294/547mt_/001-8.jpg)
-
(http://i29.photobucket.com/albums/c294/547mt_/003-5.jpg)[/img]
-
(http://i29.photobucket.com/albums/c294/547mt_/038.jpg)[/img]
-
(http://i29.photobucket.com/albums/c294/547mt_/032.jpg)[/img]
-
(http://i29.photobucket.com/albums/c294/547mt_/035.jpg)[/img]
-
(http://i29.photobucket.com/albums/c294/547mt_/050-1.jpg)[/img]
-
(http://i29.photobucket.com/albums/c294/547mt_/017-1.jpg)[/img]
-
(http://i29.photobucket.com/albums/c294/547mt_/042-1.jpg)[/img]
-
:tu: :tu: :tu:
-
i love turbos