SuzukiHayabusa.org
TECHNICAL => B KING => Topic started by: nhgunnut on February 28, 2010, 07:07:44 AM
-
Ok Fellow B King owners let see some of your winter Mods
Here are a few of mine. ( Pretty Much all comfort stuff this year)
First MFW Vario Pegs, (they make them for Busa's as well) At $139 they are a bit pricer than the Buell mod but you have more choices for the length (20mm 23mm and 30mm) I chose a 23mm drop. The other nice feature is that because it is a 3 piece system you can adjust the angle of the of the peg. (http://i261.photobucket.com/albums/ii59/rick1957_photo/002-1.jpg)
,
(http://i261.photobucket.com/albums/ii59/rick1957_photo/001-2.jpg)
I chose a slightly rearward cant. (http://i261.photobucket.com/albums/ii59/rick1957_photo/045.jpg)
This gave me extra leg room while not requiring that I change the position of the Shift or rear brake levers.
(http://i261.photobucket.com/albums/ii59/rick1957_photo/012.jpg)
Next the wife was kind enough to get me the Bagster tank cover and a bag
,
(http://i261.photobucket.com/albums/ii59/rick1957_photo/008.jpg)
,
(http://i261.photobucket.com/albums/ii59/rick1957_photo/011.jpg)
The bag is the rider model it is large but works well with the upright seating position of the B King ( I like this setup well enough that I ordered one for the Hayabusa and a smaller bag as well that I can swap back and forth)
Moving along to the Mirrors I switched out the stock one (with some help from friends) to a Set of Signal Mirrors
,
(http://i261.photobucket.com/albums/ii59/rick1957_photo/012-1.jpg)
,
Lastly in comfort area, ( I don't have a good Photo) Installed a set of Oxford Heated Grips. They are a major improvement over the Hot Grips that I have on the Busa. Instead of a Hi Lo switch, it comes with a 5 position controller and mounting brackets. Also they are not as thick as the Hot grips and have a nicer texture
Still waiting to be installed is the ECU flashing Kit I got from BoostBySmitth
-
what are you waiting for LOL?