SuzukiHayabusa.org
TECHNICAL => B KING => Topic started by: JohnnyBKing on April 04, 2010, 08:47:30 PM
-
I'm finally taking the B up to Schnitz tomorrow morning to get it tuned on the dyno. I'll pass along the numbers and how everything went when I get back in town. Wish me luck!!!!
-
Can't wait to hear your numbers you get. Good luck!
-
cool, have fun, what boost levels are you tuning up to?
Going there friday to play with my 08 turbo as well :thumb:
-
cool, have fun, what boost levels are you tuning up to?
Going there friday to play with my 08 turbo as well :thumb:
and yo dont call i see how it is =)
-
cool, have fun, what boost levels are you tuning up to?
Going there friday to play with my 08 turbo as well :thumb:
and yo dont call i see how it is =)
aint heard from ya in a while, doing alright? Get anywhere with yours yet?
-
cool, have fun, what boost levels are you tuning up to?
Going there friday to play with my 08 turbo as well :thumb:
and yo dont call i see how it is =)
aint heard from ya in a while, doing alright? Get anywhere with yours yet?
Been building everyones shit got my 08 1k done just neeed some dyno time you make a ecu editer yet fo a 07-08 gsxr 1000 yet? the busa will hope to be done by next month =)
-
DAMN IT!!!!! We had to abort the mission because the Microtech box won't send a signal to the secondary injectors. I had to leave the bike there so Ryan can get with Richard and figure out a fix. It sucks, but Richard and Ryan Schnitz are top notch professional's and we'll get it sorted out. The boost controller is programmed and everything else looks good, so when the box is fixed he should get it done quick. For those of you that don't know Ryan Schnitz or his skills with a dyno, this is my 2nd turbo bike I've had him tune, and when it leaves his shop it's perfect! He's good. Oh yeah, he flashed the ECM, too.
-
DAMN IT!!!!! We had to abort the mission because the Microtech box won't send a signal to the secondary injectors. I had to leave the bike there so Ryan can get with Richard and figure out a fix. It sucks, but Richard and Ryan Schnitz are top notch professional's and we'll get it sorted out. The boost controller is programmed and everything else looks good, so when the box is fixed he should get it done quick. For those of you that don't know Ryan Schnitz or his skills with a dyno, this is my 2nd turbo bike I've had him tune, and when it leaves his shop it's perfect! He's good.
Ryan is a stand up guy for sure :thumb:
-
let us know what happens... :thumb:
-
Ok, I got my bike back today. There was nothing wrong with the Microtech box. Ryan told me Richard told him to put some air to it and it started working fine. Anyhow, it's finished and running good. Ryan only took it up to 11 psi and it made 330 HP and I think 179 TQ. There's plenty more left in it. So, overall, I'm very pleased with Richards kit, his tech support is awesome, and Ryan did a fantastic job with my bike, AGAIN!! I suck at posting pics, so bare with me in the next couple days I'll try to post the dyno sheet.
-
good job :thumb: make sure you post pics of the bike also.. if you need help with that , just email me the pics and I will post them for you.... Jody
nickelcityracing@persona.ca
-
I'll take you up on that. I can build a turbo bike, but I can't post a picture. Am I sorry or what?!?! :?
-
no problem, I have a Bking also and would love to turbo it , but can only afford one turbo bike at a time.... ultra turbo busa it is for know.... :vl:
-
It looked sweet when i saw it, nice mounting of ams1000 and boost gauge :thumb:
-
I bet the B-king with it up right seating position would be fun as hell with that much power.
-
here is his bike....
(http://i133.photobucket.com/albums/q46/nickelcityracing/Bking001.jpg)
(http://i133.photobucket.com/albums/q46/nickelcityracing/Bking002.jpg)
(http://i133.photobucket.com/albums/q46/nickelcityracing/Bking003.jpg)
-
looks killer, black out the rearsets, dum pipes, etc and it would look sinister :twisted:
how's she ride?
-
It rides very nice. Funny you should mention blacking out those pieces. I just got introduced to a local powdercoater last week. The first thing I will black out is the chrome dash piece on the tank. What were they thinking with that? Is it just me or has anybody else had bad sun glare from that thing?
-
Jody.
Thanks for posting those pictures for me.
Johnny D.
-
no problem, i am jealous of your b king.... hope to turbo mine some day....
-
Ok, I got my bike back today. There was nothing wrong with the Microtech box. Ryan told me Richard told him to put some air to it and it started working fine. Anyhow, it's finished and running good. Ryan only took it up to 11 psi and it made 330 HP and I think 179 TQ. There's plenty more left in it. So, overall, I'm very pleased with Richards kit, his tech support is awesome, and Ryan did a fantastic job with my bike, AGAIN!! I suck at posting pics, so bare with me in the next couple days I'll try to post the dyno sheet.
wow 330HP is usually what you see from a stage 2 busa on 15-16lb. Do you have any motor work done?
-
The motor has Wossner rods and pistons, SS valves with 65lb. springs, studs, lock up clutch. I thought that sounded high too but he showed me on the boost controller he had 7lbs. with the 4lb. spring in the wastegate running C-16.
-
Nice Boost King :thumb:
-
Thank you!!
-
The motor has Wossner rods and pistons, SS valves with 65lb. springs, studs, lock up clutch. I thought that sounded high too but he showed me on the boost controller he had 7lbs. with the 4lb. spring in the wastegate running C-16.
yeah not to take anything away from your numbers thats why I was wondering if you head cams and some headwork done. So many of these dynos are 20Hp different its not even funny. I bet your bike makes good power though and just as much as any other turbo bike thats built the same :thumb:
-
yup more than 11 psi imo but congrats either way
-
Do you think it could have that boost creep guys talk about? When I picked up the bike, the boost controller had 7psi programmed in it with the 4lb spring. I raised a brow when I looked at the sheet, because that definitely seems like a high number for 11lb of boost.
-
to me seems high as well, my bike on same dyno i think was 315-320 ish at 14 psi
-
Was that with a stage 2 set up?
-
Same turbo as you ecu controlling all fueling
-
That makes it sound like either his dyno is WAY off, or it was making more than 11 lbs of boost. How or what would cause it to make more boost than whats programmed into the AMS-1000?
-
power sounds high for 11 lbs. But then again, Ryan knows what hes doing for sure....If everything is in fact correct, that thing makes a lot of power. My turbo makes about 330 at 14 lbs....
-
Good looking bike
-
I still absolutely love this bike