SuzukiHayabusa.org

MEMBERS => MEMBER PROJECTS => Topic started by: magus on October 08, 2010, 08:17:47 AM

Title: rail buggy for the GF
Post by: magus on October 08, 2010, 08:17:47 AM

Building a rail buggy so my gf and her daughter can tag along when I'm on the bike.  not bike related but...  maybe I'll come accross a cheap busa engine later on.

this is what It looked like when I got it.  some asshole had sprayed everything red even the wiring

(http://lh5.ggpht.com/_UEzRU8O0hHk/TDXoRcXa47I/AAAAAAAABWY/DPveuVw97e8/s400/IMG00739.jpg)

(http://lh6.ggpht.com/_UEzRU8O0hHk/TDXoSHAEAII/AAAAAAAABWo/vOdWHpAbVAA/s400/IMG00742.jpg)

(http://lh5.ggpht.com/_UEzRU8O0hHk/TDXoSn2pLeI/AAAAAAAABWs/b5hJsZ7Zmpo/s400/IMG00743.jpg)

Title: Re: rail buggy for the GF
Post by: magus on October 08, 2010, 08:25:52 AM

had no dash..

(http://lh4.ggpht.com/_UEzRU8O0hHk/TFhNuvvlE0I/AAAAAAAABY4/g1LPhs_F2GE/s288/IMG00780.jpg)

(http://lh5.ggpht.com/_UEzRU8O0hHk/TFhNvA4g1FI/AAAAAAAABY8/jDtlFmsSoEQ/s288/IMG00781.jpg)

(http://lh4.ggpht.com/_UEzRU8O0hHk/TFhNuAnHLPI/AAAAAAAABY0/ecdMFdPU5eo/s288/IMG00779.jpg)

(http://lh3.ggpht.com/_UEzRU8O0hHk/TIkXJaZE4wI/AAAAAAAABdo/Dji4TyFrmtc/s288/2010-09-06_15-25-18_202.jpg)
After all this I look and relize I was using flux core wire that needed gas sheilding.... :sprz:    I have gassless now

Title: Re: rail buggy for the GF
Post by: magus on October 08, 2010, 08:33:43 AM

(http://lh3.ggpht.com/_UEzRU8O0hHk/TJzjOnUY4II/AAAAAAAABdo/Kghb0FfccSc/s400/2010-09-12_15-24-25_620.jpg)

(http://lh5.ggpht.com/_UEzRU8O0hHk/TJzigvCK3uI/AAAAAAAABdo/lrxG3l0SZYs/s400/2010-09-12_15-24-06_181.jpg)

(http://lh4.ggpht.com/_UEzRU8O0hHk/TJzkjwxAi1I/AAAAAAAABdo/ivuzO1Ko24c/s400/2010-09-12_15-25-37_71.jpg)

(http://lh3.ggpht.com/_UEzRU8O0hHk/TJzoB433A4I/AAAAAAAABdo/Kd5xhBpBv9M/s400/2010-09-18_20-57-30_31.jpg)

(http://lh3.ggpht.com/_UEzRU8O0hHk/TJzlpi7EzKI/AAAAAAAABdo/9eW3YEbu6yU/s400/2010-09-12_15-26-15_545.jpg)

(http://lh3.ggpht.com/_UEzRU8O0hHk/TJzoa4_fkxI/AAAAAAAABdo/tFDqUuim7QE/s400/2010-09-21_21-09-54_742.jpg)

(http://lh3.ggpht.com/_UEzRU8O0hHk/TJzosXVNgjI/AAAAAAAABdo/oGbnVnTy-5s/s400/2010-09-22_11-43-16_531.jpg)

Title: Re: rail buggy for the GF
Post by: magus on October 08, 2010, 08:36:59 AM

don't like spindle rims so I got these for the front.  I will add adapters.

(http://lh4.ggpht.com/_UEzRU8O0hHk/TJzoHS3C3ZI/AAAAAAAABdo/THyTxGp8jYM/s400/2010-09-19_17-37-24_945.jpg)

(http://lh4.ggpht.com/_UEzRU8O0hHk/TJzoPDq3hsI/AAAAAAAABdo/QrwHvN-Jn28/s400/2010-09-19_17-39-25_774.jpg)

Title: Re: rail buggy for the GF
Post by: TurboGen2 on December 01, 2010, 05:07:53 PM

any updates?

Title: Re: rail buggy for the GF
Post by: magus on December 03, 2010, 09:08:15 AM

(http://lh6.ggpht.com/_UEzRU8O0hHk/TLWmsJ58exI/AAAAAAAABgE/5hPNqVWzgvo/s400/2010-10-12_21-02-53_428.jpg)


It's alot further along than that but havn't taken pics  (will snap some this eve)

I have plasma cut the new floor (still needs to be trimmed)
 I have rebuilt the trans and motor   finnishing the chrome on the motor tonight
still need to order some chrome rims and tires

If I could concentrait on one project at a time Id be done...  I must have friggen a.d.d. or some shit

Title: Re: rail buggy for the GF
Post by: TurboGen2 on December 04, 2010, 06:19:06 PM

hahaha i know what you mean. ive been doing nothing but nonstop working. but its going to pay to completely build my gen2. now that im single i can do what i want!