SuzukiHayabusa.org

TECHNICAL => GEN II BUSA => Topic started by: Karolina2kid on January 17, 2011, 08:56:59 PM

Title: '08 triple tree?
Post by: Karolina2kid on January 17, 2011, 08:56:59 PM

Put a Brocks triple tree on the bike and when i turn hard left the front brake grabs the dash a little..Thats with a inch drop on the front.. Should i change the triple tree??Tried notching out the panel, its not a good site but its better than it was??? HELP???

Title: Re: '08 triple tree?
Post by: ondre30 on January 18, 2011, 01:55:40 PM

Don't notch out your panels just angle your brake and clutch levers down some.

Title: Re: '08 triple tree?
Post by: SLEEPERBUSA on January 19, 2011, 09:02:40 AM

I have one from Spencer Cycle.
I haven't put it on, but he says that it doesn't hit.

Title: Re: '08 triple tree?
Post by: Abusive on January 20, 2011, 08:32:37 AM

I have one from Spencer Cycle and he's right it doesn't hit. Sell the one you have and get one from Doug at Spencer Cycle.  :thumb:

Title: Re: '08 triple tree?
Post by: SLEEPERBUSA on March 25, 2012, 01:27:39 AM

Ok,
I know this is old, but I just got a new 11 and still have questions.
The Spencer Cycle triple worked great with stock levers, but when I installed the Pazzos, they hit again.
This was on my 09.

I wanna lower the 11 with Pazzos. Does anyone know of a tree that this will work with?

Thanks in advance!!

Title: Re: '08 triple tree?
Post by: Got-Busa? on March 25, 2012, 03:35:29 PM

I don't know of any. 

Which Pazzo's do you have? 

They said Pazzo redesigned the levers to help eliminate some of these issues but not sure if the new ones work with aftermarket TT...

Title: Re: '08 triple tree?
Post by: SLEEPERBUSA on March 25, 2012, 04:43:46 PM

Mine are a few years old, so I'm doubting it.
Can you lead me to this discussion, please??
Thanks Josh.

Title: Re: '08 triple tree?
Post by: Got-Busa? on March 25, 2012, 05:07:29 PM

It's on Hayabusa.org, let me see if I can find it later tonight..

Title: Re: '08 triple tree?
Post by: SLEEPERBUSA on March 26, 2012, 01:33:44 AM

Thanks. I haven't been there in a LONG time.

Title: Re: '08 triple tree?
Post by: Got-Busa? on March 28, 2012, 04:53:19 PM

Sorry it took me so long.  Here are the three main threads discussing it...

http://www.hayabusa.org/forum/gen-ii-busa-information/124078-pazzos-dont-fit-again-frustrated.html

http://www.hayabusa.org/forum/gen-ii-busa-information/149958-brake-lever-hits-help-pls-2.html

http://www.hayabusa.org/forum/gen-ii-busa-information/105029-pazzo-levers-not-sold-gen-ii-asvs-dont-fit.html

Title: Re: '08 triple tree?
Post by: YSI408 on March 29, 2012, 07:48:17 AM

I have one on my bike it doesn't hit..

Quote from: SLEEPERBUSA on January 19, 2011, 09:02:40 AM

I have one from Spencer Cycle.
I haven't put it on, but he says that it doesn't hit.

Title: Re: '08 triple tree?
Post by: Nolimitracing on March 29, 2012, 06:44:47 PM

I have one from spencer and it hits with my pazzo's shorties.

Title: Re: '08 triple tree?
Post by: SLEEPERBUSA on March 29, 2012, 11:00:54 PM

Yep, Spencer didn't hit with stock levers. Put on the Pazzos and it hit.
Damn good tree tho.

Title: Re: '08 triple tree?
Post by: SLEEPERBUSA on March 29, 2012, 11:24:06 PM

Thanks Josh.
I'll check it out.

Title: Re: '08 triple tree?
Post by: YSI408 on March 30, 2012, 11:05:22 AM

+1

Quote from: SLEEPERBUSA on March 29, 2012, 11:00:54 PM

Yep, Spencer didn't hit with stock levers. Put on the Pazzos and it hit.
Damn good tree tho.