SuzukiHayabusa.org

GENERAL => DRAG RACING => HEAVY HITTERS => Topic started by: beeJay on July 30, 2011, 05:43:55 AM

Title: heavy hitter bking gearing
Post by: beeJay on July 30, 2011, 05:43:55 AM
Can anyone give me some advice on gearing i weigh in at 340 and the bike is a bking with 340 at the tire. currently running stock length altough it is planned to take it out to 68" and lower it as far poss
Title: Re: heavy hitter bking gearing
Post by: fatnslow on July 30, 2011, 10:52:16 AM
what is stock gearing on it?
Title: Re: heavy hitter bking gearing
Post by: BigJda330lbRacer on August 01, 2011, 09:01:39 PM
If any of you big guys with the turbos need a 51 vortex rear i have one with one pass on it.... NOS bikes dont like 51 rear sprockets :eek:
Title: Re: heavy hitter bking gearing
Post by: BigJda330lbRacer on August 01, 2011, 09:03:20 PM
Can anyone give me some advice on gearing i weigh in at 340 and the bike is a bking with 340 at the tire. currently running stock length altough it is planned to take it out to 68" and lower it as far poss

16/45 is what I ran... stock length to 68" on motor... when i added NOS it was 16/42
Title: Re: heavy hitter bking gearing
Post by: HBRRacing on August 01, 2011, 09:05:03 PM
I run weigh 275 in shorts and run 18/45 with a little over 400hp, alot of the turbo guys run this gearing, you might even try 18/48 or so if you take it out to 68"
Title: Re: heavy hitter bking gearing
Post by: BigJda330lbRacer on August 01, 2011, 09:51:57 PM
18/51 didn't work for me...  I have a 06"gsxr 51t vortex rear I would trade for something smaller... 43 to 47


If you don't mind me asking, what's your et and mph with 400hp?? If you can't answer I understand
Title: Re: heavy hitter bking gearing
Post by: fatnslow on August 01, 2011, 11:15:08 PM
i was about 340lbs at the time and about 250-265 hp with 17-43 @ 67in wb
Title: Re: heavy hitter bking gearing
Post by: HBRRacing on August 02, 2011, 08:01:37 AM
18/51 didn't work for me...  I have a 06"gsxr 51t vortex rear I would trade for something smaller... 43 to 47


If you don't mind me asking, what's your et and mph with 400hp?? If you can't answer I understand
Now you have to remember, I'm a big guy too and my bike is a streetbike, 65"  stock plastics. no cut rails and on a shinko hookup, but my best time has been 8.46@175. and thats exactly how I ride it on the street except for tire pressure and mirrors :thumb:
(http://i685.photobucket.com/albums/vv219/chrishuckeby/770.jpg)
Title: Re: heavy hitter bking gearing
Post by: Nem on August 02, 2011, 10:14:00 AM
beeJay.....ill take that 51 gsxr sprocket off your hands....lmk what ya want for it
Title: Re: heavy hitter bking gearing
Post by: BigJda330lbRacer on August 02, 2011, 10:57:58 AM
$40+paypal  as long as its to the lower48. If you in Switzerland or something Ima have to charge ya...LOL
Title: Re: heavy hitter bking gearing
Post by: Nem on August 02, 2011, 11:10:49 AM
$40+paypal  as long as its to the lower48. If you in Switzerland or something Ima have to charge ya...LOL

cool....near chicago.....send paypal addy
 :thumb:
Title: Re: heavy hitter bking gearing
Post by: BigJda330lbRacer on August 02, 2011, 11:23:33 AM
Jarion04@AOL.com
Title: Re: heavy hitter bking gearing
Post by: fatnslow on August 02, 2011, 08:16:51 PM
18/51 didn't work for me...  I have a 06"gsxr 51t vortex rear I would trade for something smaller... 43 to 47


If you don't mind me asking, what's your et and mph with 400hp?? If you can't answer I understand
Now you have to remember, I'm a big guy too and my bike is a streetbike, 65"  stock plastics. no cut rails and on a shinko hookup, but my best time has been 8.46@175. and thats exactly how I ride it on the street except for tire pressure and mirrors :thumb:
(http://i685.photobucket.com/albums/vv219/chrishuckeby/770.jpg)
great time and mph for a streetbike, especally for a big guy to  :tu:
Title: Re: heavy hitter bking gearing
Post by: HBRRacing on August 02, 2011, 09:15:43 PM
thanks Slow, I'm actually thinking about making it more of a track bike and buying me another bike to ride, I would like to have a B-King like the one this post is about, haha. I was contemplating stretching it out to 68" and going to a Hays clutch. I would REALLY like to get in the 7's, I don't know if it would though
Title: Re: heavy hitter bking gearing
Post by: JamesOK on August 02, 2011, 10:30:10 PM
thanks Slow, I'm actually thinking about making it more of a track bike and buying me another bike to ride, I would like to have a B-King like the one this post is about, haha. I was contemplating stretching it out to 68" and going to a Hays clutch. I would REALLY like to get in the 7's, I don't know if it would though

I would love to have a B-King for a second bike.
Title: Re: heavy hitter bking gearing
Post by: Nem on August 02, 2011, 10:46:14 PM
Jarion04@AOL.com

paypal sent
 :thumb:
Title: Re: heavy hitter bking gearing
Post by: fatnslow on August 03, 2011, 12:11:32 AM
thanks Slow, I'm actually thinking about making it more of a track bike and buying me another bike to ride, I would like to have a B-King like the one this post is about, haha. I was contemplating stretching it out to 68" and going to a Hays clutch. I would REALLY like to get in the 7's, I don't know if it would though
if it didnt it would be damm close thats for sure, wish mine ran close to what yours does
Title: Re: heavy hitter bking gearing
Post by: BigJda330lbRacer on August 03, 2011, 05:40:15 AM
Jarion04@AOL.com

paypal sent
 :thumb:

Got it, I was forced on O.T. today, I'll ship it tommorrow.
Title: Re: heavy hitter bking gearing
Post by: BigJda330lbRacer on August 05, 2011, 02:09:14 PM
$40+paypal  as long as its to the lower48. If you in Switzerland or something Ima have to charge ya...LOL

cool....near chicago.....send paypal addy
 :thumb:

mailed off today...sent postal service mail. I'll send the delivery conformation number to your inbox