SuzukiHayabusa.org
SALES - Read the rules before you post! => Results with Products/Sponsors/Members => Topic started by: Mike-Nightrider on August 09, 2011, 01:59:15 PM
-
Ive killed my chain last weekend at a Test & Tune weekend at top speed.
Only a few things are broken.
Thanks RCC for that cool "Case saver".
No damage at the water pump or at the engine case :tu:
That part is worth every penny.
Mikey
(http://i427.photobucket.com/albums/pp355/Mike-Nightrider/IMG_5807.jpg)
-
(http://i427.photobucket.com/albums/pp355/Mike-Nightrider/KopievonIMG_7085.jpg)
-
(http://i427.photobucket.com/albums/pp355/Mike-Nightrider/KopievonIMG_7087.jpg)
-
(http://i427.photobucket.com/albums/pp355/Mike-Nightrider/KopievonIMG_7089.jpg)
-
im glad you are alright. Thats always my biggest fear.
-
Proof that money in the right spots could save a lot more money and physical pain if something goes wrong! We are sitting on bombs and chainsaws and it's good to see you're ok other than some minor damage. :tu:
-
Yes, Im ok bros. :D
(http://i427.photobucket.com/albums/pp355/Mike-Nightrider/KopievonIMG_7075.jpg)
-
Always wondered how well they held up,pretty good from the looks of it :thumb:
what kind of chain was it?
-
Mike glade you weren't hurt !
I use the EK 630MS on the race bike it has a tensile strenth of 11,880 lbs and rated for bike up to 500 hp and a EK 530DRZ2 Pro Stock chain on the street bike 11,500 tensile & 300 hp max.
-
Good to see it holding up!
I see the shark still bit ya on the rear of the tail.
And now lets raise our glasses (or mugs or bottles, cans, etc)....Here's to you the inventor of chain guards.
-
Mike glade you weren't hurt !
I use the EK 630MS on the race bike it has a tensile strenth of 11,880 lbs and rated for bike up to 500 hp and a EK 530DRZ2 Pro Stock chain on the street bike 11,500 tensile & 300 hp max.
It was a DRZ2 from EK. I think it is a good chain.
Dont know why it happened. Never had a problem before.
Ive installed a new DRZ2, taped the tail and repaired the chainguard so good I can.
I was at the NitrOlympix/Hockenheim last weekend and everything was perfect again. :bike:
-
Mike did the chain break or did the master link brerak ?
-
It was the chain Ron. The master link was still ok.
I will change the chain more often than before. Better is that. I swear :wink:
-
It was the chain Ron. The master link was still ok.I will change the chain more often than before. Better is that. I swear
Mike
The EK 630MS chain is the way to go I have been using them for years on my big motor bikes.
-
It was the chain Ron. The master link was still ok.I will change the chain more often than before. Better is that. I swear
Mike
The EK 630MS chain is the way to go I have been using them for years on my big motor bikes.
630 is a really big chain. 6/8 x 3/8 ! :shock:
I drove a 630 on my Top Gas dragster with slick and wheelybar. :bike:
-
Why do you have the lever set so far out on the shift shaft it is nearly off? Just curious.
-
Why do you have the lever set so far out on the shift shaft it is nearly off? Just curious.
Ahhhh, on the first pic, right? :id:
That is an old pic what Ive made when I reassembled the bike.
Ive only put the lever on the shaft for not hanging down. :wink:
Very observant of you :thumb: