SuzukiHayabusa.org
TECHNICAL => NITROUS => Topic started by: California Kid on December 07, 2011, 01:09:35 PM
-
I have a Gen 2 Has anybody tried using the Ti valves and change the valve springs only . and use a big shot (60 to 80 shot) .
My question is can the valves handle the big shot .
Bill
-
do not use the stock ones but you can use Ti valves
-
Johnny ,
So you are saying its ok to use the ti valves and change the valve springs . my question is will the ti valves be able to handle a big shot .
Bill
-
I think he's saying its ok to use aftermarket ti valves, maybe they are stronger at the base of the stem?
-
I think he's saying its ok to use aftermarket ti valves, maybe they are stronger at the base of the stem?
:tu:
Bill either gen 1 or SS
-
ti are fine just keep your shot at 60 or lower
-
ti are fine just keep your shot at 60 or lower
go ahead try that spraying a 1.5 mile run :bah:
-
got it johnny , I will go with stock 0r ss valves .
Bill