SuzukiHayabusa.org
TECHNICAL => NITROUS => Topic started by: Bim28 on October 08, 2012, 06:42:22 PM
-
Have any of you guys ever used this system?
http://www.youtube.com/watch?v=9ZFrcs9X-og
-
There are better ways to do it other than adding a NItrous pusher system. There are no NANO systems for bikes,bottles are too large
-
they used to sell nano nitrous systems for bikes and I have seen pics of them before. 2.5lb nitrous bottle and 20oz pusher bottle and reg.
-
Last time I spoke with Steve over at Nano they did have a system for bike but that was about a year ago
-
There are better ways to do it other than adding a NItrous pusher system. There are no NANO systems for bikes,bottles are too large
I just thought it was a nice concept. What other ways are there?
-
http://www.ebay.com/itm/2-5-NANO-NITROUS-KIT-MOTORCYCLE-SNOWMOBILE-HAYABUSA-HARLEY-N20-0130302-/270637771041
-
http://www.ebay.com/itm/2-5-NANO-NITROUS-KIT-MOTORCYCLE-SNOWMOBILE-HAYABUSA-HARLEY-N20-0130302-/270637771041
As I stated, the bottle is too large. For most but not all professional drag racing events the bottle must between the frame or swingarm. LSR events the bottle can be mounted on the outside
-
http://www.ebay.com/itm/2-5-NANO-NITROUS-KIT-MOTORCYCLE-SNOWMOBILE-HAYABUSA-HARLEY-N20-0130302-/270637771041
As I stated, the bottle is too large. For most but not all professional drag racing events the bottle must between the frame or swingarm. LSR events the bottle can be mounted on the outside
That bottle could be mounted along with a regular 2.5# bottle if desired. Could be mounted in the arm as with most bottles, or mounted under teh tail, as long as quick release fasteners were used ont eh bodywork. Alternatively, there are 13ci and 22ci 3000psi bottles available that would work as the nitrogen pusher as well.
I'm not really sure it would be of benefit for dragracing, but it certainly shouldn't hurt matters to have a continuous bottle pressure during a pass. Still wodul get variations throughout the system, but at least the bottle would be more consistent.
-
http://www.ebay.com/itm/2-5-NANO-NITROUS-KIT-MOTORCYCLE-SNOWMOBILE-HAYABUSA-HARLEY-N20-0130302-/270637771041
As I stated, the bottle is too large. For most but not all professional drag racing events the bottle must between the frame or swingarm. LSR events the bottle can be mounted on the outside
That bottle could be mounted along with a regular 2.5# bottle if desired. Could be mounted in the arm as with most bottles, or mounted under teh tail, as long as quick release fasteners were used ont eh bodywork. Alternatively, there are 13ci and 22ci 3000psi bottles available that would work as the nitrogen pusher as well.
I'm not really sure it would be of benefit for dragracing, but it certainly shouldn't hurt matters to have a continuous bottle pressure during a pass. Still wodul get variations throughout the system, but at least the bottle would be more consistent.
I would rather regulate the bottle pressure lower and adjust the jet size or run 2-2lbs bottles