SuzukiHayabusa.org

TECHNICAL => B KING => Topic started by: knecum on January 14, 2013, 07:44:48 PM

Title: SHORT AIR BOX STACKS
Post by: knecum on January 14, 2013, 07:44:48 PM
Anyone know which short stacks to order for the B-King's air box? Like the trick you do in a Busa with all 4 shorts. The Busa's are to tight to go in the B-Kings air box hole. Thanks!!
Title: Re: SHORT AIR BOX STACKS
Post by: gixxted on January 27, 2013, 05:30:45 PM
K7/8 1000 stacks might be worth a try,
 i havn't checked Bking box, but am using some on gen 2 throttle bodies in a chassis bike.
Title: Re: SHORT AIR BOX STACKS
Post by: canadian john on January 27, 2013, 06:09:54 PM
I have 4,,, K7/8 1000  short stacks new in OEM package #13881-41G00 they are abit to small for gen1 box,not sure it they will fit the king
Title: Re: SHORT AIR BOX STACKS
Post by: moparict on January 28, 2013, 05:52:59 AM
Is there a reason you couldn't take the holes out a bit larger or are you wanting to keep the airbox OEM?
Title: Re: SHORT AIR BOX STACKS
Post by: knecum on January 28, 2013, 07:25:55 AM
Is there a reason you couldn't take the holes out a bit larger or are you wanting to keep the airbox OEM?
   You mean do I want to keep the holes in the box stock size? Of coarse the stock air box stays on. I installed the cold air kit, but when I tried to put on short stacks from a gen 2 they didn't fit right, either to loose or to tight, I will check again today.. I'm sure I can figure it out. Just thought someone knew off the top of their head which ones would work
Title: Re: SHORT AIR BOX STACKS
Post by: nickelcityracing on February 04, 2013, 08:19:16 AM
Steve , I used the ones from my 03 busa on my B king,  I had to make the holes a bit bigger but then they went in fine..... good luck