SuzukiHayabusa.org

TECHNICAL => MODS => Topic started by: blubyubusa on November 14, 2014, 11:23:59 PM

Title: risers
Post by: blubyubusa on November 14, 2014, 11:23:59 PM

Being very old and also enjoying the power of a busa I need some very high risers on my handlebars for a more comfortable ride. I have the one inch spacers and as I said being VERY OLD I need more than that. I have checked out the speigler stuff and I do believe it would meet my need and since longer cables and clutch hoses (I think)are included that makes the package attractive. At more than five hundred dollars it loses some luster. Is there a cheaper way to meet my needs? Any thoughts would be appreciated.

Title: Re: risers
Post by: butchersbulldogs on December 18, 2014, 02:37:53 PM

I have a bad back and need a Moore comfortable setback position so i went with a set of heli bars they are 1inch up & 1 1/2 inches back you have to reroute your cables but  they still fit thay cost around $200. Or so but well worth the money hope this helps you out
   Butchersbulldogs

Title: Re: risers
Post by: Vanishing Point on December 19, 2014, 07:59:40 AM

If you buy HelliBars, you don't need longer cables.
Risers 1" + HelliBars 1" is more comfort.

Greets from a LSL SuperbikeKit user and a order a ABM/Spiegler Set now on this moment.

Title: Re: risers
Post by: Red on December 20, 2014, 10:24:50 AM

Quote from: blubyubusa on November 14, 2014, 11:23:59 PM

Is there a cheaper way to meet my needs?

Any thoughts would be appreciated.

Go with the Buell peg mod to help with your riding position .  .  .

Title: Re: risers
Post by: Vanishing Point on December 20, 2014, 12:43:36 PM

(http://i59.tinypic.com/jkypo1.jpg)

Title: Re: risers
Post by: Vanishing Point on December 20, 2014, 12:45:21 PM

(http://i58.tinypic.com/303k0lf.jpg)

Title: Re: risers
Post by: Vanishing Point on December 20, 2014, 12:47:52 PM

(http://i57.tinypic.com/2qv8nr9.jpg)

Title: Re: risers
Post by: Vanishing Point on December 20, 2014, 12:49:39 PM

(http://i60.tinypic.com/a4wykn.jpg)

Title: Re: risers
Post by: Vanishing Point on December 20, 2014, 12:54:37 PM

this is my order from last week  8)

(http://i60.tinypic.com/2yyywzq.jpg)

Title: Re: risers
Post by: butchersbulldogs on December 20, 2014, 03:10:20 PM

they look  nice . how much room do you have from fairing at full turn ? i have heli bars 1 inch up 1.5 inch back they look much lower than yours and they dont clear by much . my heli bars fit in the stock handle bar hole . your set up looks realy comfortable them the buel pegs wold be heaven .   butchersbulldogs

Title: Re: risers
Post by: Vanishing Point on December 20, 2014, 07:32:56 PM

I have no room and cut the screen.
 for more play steering.