SuzukiHayabusa.org

TECHNICAL => GEN II BUSA => Topic started by: proutyc on May 06, 2015, 02:46:29 PM

Title: Aftermarket Cams
Post by: proutyc on May 06, 2015, 02:46:29 PM
Is there a common spec aftermarket cam that is ok to use on the Ti Valves? Am building up a 1500cc Gen2 and looking at cam options.

Thanks
Title: Re: Aftermarket Cams
Post by: Ghost-Geezer on May 08, 2015, 06:00:53 AM
Contact Web cams.
Title: Re: Aftermarket Cams
Post by: knecum on July 06, 2015, 08:23:53 PM
Quote from: proutyc on May 06, 2015, 02:46:29 PM
Is there a common spec aftermarket cam that is ok to use on the Ti Valves? Am building up a 1500cc Gen2 and looking at cam options.

Thanks
depends on what your trying to do, weight , cr,  mega cycle has a good selection with lots of duration options
Title: Re: Aftermarket Cams
Post by: fvance on July 07, 2015, 09:27:08 AM
Two of my motors have Gen 2 titanium valves and BIG cams. Cant remember if they are Megacycle or Webb cams. Competition only :D
Title: Re: Aftermarket Cams
Post by: proutyc on July 07, 2015, 01:55:37 PM
Many thanks for the responses. What springs are you using?
Title: Re: Aftermarket Cams
Post by: fvance on July 07, 2015, 03:01:11 PM
Dont know Knecum and Carpenter set my heads up.
Title: Re: Aftermarket Cams
Post by: knecum on July 08, 2015, 01:11:49 PM
65-70lb, but not for street use, or you will eat your tappets up after 1500 miles with the big cams, for the street yosh stg2 are perfect
Title: Re: Aftermarket Cams
Post by: Ghost-Geezer on July 08, 2015, 09:42:18 PM
That sounds like a lot if stock pressure is 30 lbs.  Must be a heckuva cam set.  Mine will be around 50-55.  Smaller cams, I assume.
Title: Re: Aftermarket Cams
Post by: lilbcollins on July 09, 2015, 01:44:28 PM
Quote from: knecum on July 08, 2015, 01:11:49 PM
65-70lb, but not for street use, or you will eat your tappets up after 1500 miles with the big cams, for the street yosh stg2 are perfect

I know another guy with the Yosh cams and he loves them.