SuzukiHayabusa.org

TECHNICAL => GEN II BUSA => Topic started by: fvance on March 07, 2016, 11:05:23 PM

Title: Short velocity stacks
Post by: fvance on March 07, 2016, 11:05:23 PM: What do you run for short, equal length velocity stacks?
Title: Re: Short velocity stacks
Post by: MJ Williams on March 08, 2016, 04:40:06 AM: https://store.schnitzracing.com/schnitz-velocity-stacks-suzuki-gsx1300r-hayabusa-08-15/
Title: Re: Short velocity stacks
Post by: fvance on March 08, 2016, 09:33:29 AM: Ordered a set. Is that what you run. thanks Mike.
Title: Re: Short velocity stacks
Post by: MJ Williams on March 08, 2016, 11:14:36 PM: Yes that is what I use.
Karl was using some stacks from John Hartley but I can't speak to what length they were or price.
Title: Re: Short velocity stacks
Post by: fvance on March 09, 2016, 10:23:46 AM: All of Karl's stuff was Gen1. I run John's stuff on my bikes. Really nice pieces. I did not check if he makes anything for Gen 2s. Hartleys stuff is not really expensive, but lots more than the rubber OEM ones.
Title: Re: Short velocity stacks
Post by: Got-Busa? on March 09, 2016, 09:45:06 PM: I was using the OEM GSXR1K short stacks which are a direct replacement on the Gen-2's... ;)
Title: Re: Short velocity stacks
Post by: Ghost-Geezer on March 09, 2016, 11:30:19 PM: Quote from: Got-Busa? on March 09, 2016, 09:45:06 PM
I was using the OEM GSXR1K short stacks which are a direct replacement on the Gen-2's... ;)

I was using the stacks off of a 2007-8 GSXR 750. All short.
Title: Re: Short velocity stacks
Post by: fvance on March 10, 2016, 09:28:56 AM: I think that is what Schnitz sells for short stacks on Gen2 Busa. I have ordered a set.
Title: Re: Short velocity stacks
Post by: Fritzjunker on April 06, 2016, 04:09:32 PM: I run the gsxr 1k short stacks. When I had got my brocks exhaust, there was a paper sayin they had got their best results with those.
Title: Re: Short velocity stacks
Post by: piratediverjefff on April 06, 2016, 10:07:22 PM: I got the ones from Schnitz also,tuner says he thinks I picked up probably 3 hp or so with no loss on the bottom end.