SuzukiHayabusa.org
TECHNICAL => ALL MOTOR TALK => Topic started by: tyboogie on October 27, 2016, 12:05:42 PM
-
Looking to replace my clutch on my 03 busa. Can't find an oem kit on ebay, only listing 04-07. Brocks Schnitz MPS carries an oem kit but they all list the years differently. Is the 04'07 compatible. I have a welded clutch hub what do I also need while in the clutch whose HD springs do I buy? Understand will need to stagger. I have the RCC case saver also my motor is a 1441...
-
Looking to replace my clutch on my 03 Hayabusa.
Can't find an oem kit on ebay,
only listing 04-07.
Brocks Schnitz MPS carries an oem kit but they all list the years differently.
Is the 04' - 07' compatible ?
I have a welded clutch hub what do I also need while in the clutch whose HD springs do I buy ?
Understand will need to stagger.
I have the RCC case saver also my motor is a 1441...
Hit up ~ http://www.hayabusazone.com/clutch.html
(http://www.hayabusazone.com/resources/clutches/exp.jpg)
-
Much better than oem.
-
You can use the lit listed for 04-07
-
You can use the lit listed for 04-07
I bought the 04-07 kit oem with the 60# ape springs. I understand the height needs to be between 1.97 and 2.00, but I heard to use all things steels and fibers, or can I just use what's in the new pack?