SuzukiHayabusa.org
TECHNICAL => HELP! => Topic started by: Bam750gsxr on February 25, 2017, 11:34:05 PM
-
I recently swap my k3 750 motor for a rebuilt one. Everything went smoothly except now bike won't start fuel pump will prime but starter won't kick on I'm getting c11 and c12 code which is crankshaft position sensor and can shaft position sensor. I changed both sensors still getting the same codes. Please help
-
The starter not turning the motor has nothing to do with those sensors. They only work when the motor is spinning. Apply 12v to the starter motor, if motor spins look at starter solenoid, button and wiring, if it does not ck starter with 12v after you remove it. if it spins motor is stuck.... if it doesn't starter is bad...
Let us know what you find
-
Thank you for your response I will let you know