SuzukiHayabusa.org
GENERAL => DRAG RACING => Topic started by: sportbikeryder on March 23, 2017, 08:40:23 PM
-
:fro: :grinch:
-
I mean what can one say!!! :tu:
-
wow.. i can only dream .. since ill never be able to build a bike like that
-
Wow that's crazy. I wonder what is the big contributing factor to those numbers? It it just more boost or a combination of stuff? I meet Rodney years ago at a bike race SUPER nice guy and a hellva engine builder.
-
Wow that's crazy. I wonder what is the big contributing factor to those numbers? It it just more boost or a combination of stuff? I meet Rodney years ago at a bike race SUPER nice guy and a hellva engine builder.
Biggest contributor is.....WILLIFORD RACING!
:uploaded_shooting: :uploaded_shooting: :uploaded_shooting:
-
Time to update the sig...
again
Congrats!
-
Time to update the sig...
again
Congrats!
Those aren't mine :-)
I do help with them. Mine should be out at the IDBL event with Jordan Haase riding it.
-
:thumb:
-
Dam good numbers John, :thumb:
-
:tu: They did good :bike:
-
John, what ecu are you running?
-
John, what ecu are you running?
I have an AEM Infinity on mine, the two biked pictured have Motec M400 ecu's
-
Thanks.
-
:uploaded_shooting: awesome!!!
-
E1 for Mancup at SGMP. All 3 bikes still in.
Mark G 25 vs rodney 24 next round.
Ehren went 223.99mph last round!
-
Congrats once again on a top effort.
-
We had some issues in e2 with Ehren Litten breaking a chain when letting off on a 6.7x@220mph pass, causing some significant damage. We replaced the engine, rear wheel, chain guard, straightened the subframe, and patched the tail section, but he lost in the semis with a 6.81 to Justin Doucet 6.80 with a .009 mov.
Rodney went red in the semi likely due to a clutch setup change (knocked off .010 on the clutch the previous pass from slipping up top) causing the bike to react quicker and bog in the 60ft....that said, the bike hooked solid out the back and went 226mph!!!
We had a good weekend, but we're hoping to have Ehren vs Rodney in the final. The gloves were going to come off as well as the boost limiters raised (at least on Ehrens bike). Ehren asked me if we had aNY more heads back at the shop because he was pretty sure he was gonna crack the one on the bike.... maybe in two weeks at the IDBL kickoff in MD...
-
We had some issues in e2 with Ehren Litten breaking a chain when letting off on a 6.7x@220mph pass, causing some significant damage. We replaced the engine, rear wheel, chain guard, straightened the subframe, and patched the tail section, but he lost in the semis with a 6.81 to Justin Doucet 6.80 with a .009 mov.
Rodney went red in the semi likely due to a clutch setup change (knocked off .010 on the clutch the previous pass from slipping up top) causing the bike to react quicker and bog in the 60ft....that said, the bike hooked solid out the back and went 226mph!!!
We had a good weekend, but we're hoping to have Ehren vs Rodney in the final. The gloves were going to come off as well as the boost limiters raised (at least on Ehrens bike). Ehren asked me if we had aNY more heads back at the shop because he was pretty sure he was gonna crack the one on the bike.... maybe in two weeks at the IDBL kickoff in MD...
Congratulations to you guys. Those are some crazy times and sick mph. I just don't see how you guys keep going quicker and faster. Hard work pays off keep up the great work.
-
Nice !!
-
Who would have thought this was even possible a short time ago?!
Amazing, hard work pays off.... and sometimes it really pays off!!! :thumb: :fro:
-
I wonder what is the big contributing factor to those numbers? It it just more boost or a combination of stuff? I meet Rodney years ago at a bike race SUPER nice guy and a hellva engine builder.
Probably his special APE Billet stroker crank, available only from Rodney.
-
I wonder what is the big contributing factor to those numbers? It it just more boost or a combination of stuff? I meet Rodney years ago at a bike race SUPER nice guy and a hellva engine builder.
Probably his special APE Billet stroker crank, available only from Rodney.
That along with APE roller camchain and titanium valve spring retainers. :D
-
Cool video from last weekend in Indy. Heading to MD for the IDBL race this weekend.
https://youtu.be/vpbxU_9qQSg
-
Way to go John Boy and gang,unbelievable! :punk:
:uploaded_shooting: :uploaded_shooting: :uploaded_shooting:
-
Cool video from last weekend in Indy. Heading to MD for the IDBL race this weekend.
https://youtu.be/vpbxU_9qQSg
That is incredible ! 6 after 6 after 6 after 6 and then a 224 @ 6.77.
This is what we love.
-
First no bar in the 6's back in 2006 with a slick in Oit law Prostreet.
Now first in the 6.60's on a street tire!
-
The video on YouTube is awsome. Rodney looked to be having some problems during qualifing but put it all together during eliminations. The finals with him and Richard was crazy!
-
Killer!
-
That's AWESOME! :tu:
Definitely hauling the mail! Keep up the great work to all involved!
-
A few more from the past 2 months...prostreet and "Kings of Grudge" super street tire.
-
https://youtu.be/vpbxU_9qQSg (https://youtu.be/vpbxU_9qQSg)