SuzukiHayabusa.org

TECHNICAL => HELP! => Topic started by: firefighter82 on May 09, 2017, 09:18:16 PM

Title: Cenr\ter Pivot Height
Post by: firefighter82 on May 09, 2017, 09:18:16 PM

My 2000 Busa center pivot height is 12 3/4" and my rear axle is 12". Bike wheelie's when wide open throttle. Penske shock and multi-stage on board. Tried adjusting the adjustable links on shock and I loose the 2" clearance required by NHRA and a lot of other tracks. To low under headers and plastic.
Can anyone tell me how to get the center to rear closer in numbers?   :help: :help: :help: :help: :help: :help:

Title: Re: Cenr\ter Pivot Height
Post by: firefighter82 on May 09, 2017, 10:10:37 PM

Center Pivot Height!!! Bad spelling on me!!!!!! :D

Title: Re: Cenr\ter Pivot Height
Post by: sportbikeryder on May 10, 2017, 05:27:49 AM

Without aftermarket exhaust and trimming bodywork, it can't go low enough.

Title: Re: Cenr\ter Pivot Height
Post by: firefighter82 on May 22, 2017, 10:33:43 PM

Have a Brocks complete set on it now. It starts climbing just before 60ft. WOT and have to short shift or let off throttle. If cant lower any more or longer swing arm, what's the secret?????   :pat: :pat: :smashfreak: