SuzukiHayabusa.org

TECHNICAL => MODS => Topic started by: rick_b on September 06, 2017, 10:02:24 PM

Title: Remove Crank Trigger
Post by: rick_b on September 06, 2017, 10:02:24 PM
I want to do away with the alternator housing, so I can fit a starter nut. What is the best thing to do with the crank trigger?
Title: Re: Remove Crank Trigger
Post by: sportbikeryder on September 07, 2017, 04:49:51 AM
Most use a rt side trigger for  ignition pickup on a dyna or arc, or firestorm ignition. Fast By Gast have a billet cover for the rt side with a pickup mounted in it. We might have a used one at the shop.

You will still have to use a cover with a seal for the cases on the left side. APE make a left side exrernal starter cover setup.
Title: Re: Remove Crank Trigger
Post by: rick_b on September 08, 2017, 03:37:36 PM
Most use a rt side trigger for  ignition pickup on a dyna or arc, or firestorm ignition. Fast By Gast have a billet cover for the rt side with a pickup mounted in it. We might have a used one at the shop.

You will still have to use a cover with a seal for the cases on the left side. APE make a left side exrernal starter cover setup.

Thanks I will look in to that. I knew about the seal, the new engine plate has one in it.
Title: Re: Remove Crank Trigger
Post by: rick_b on September 17, 2017, 03:13:42 PM
sportbikeryder, Did ever check to see if you had that used Fast By Gast have a billet cover?

Rick
Title: Re: Remove Crank Trigger
Post by: Stainless1 on February 27, 2018, 10:40:53 AM
Is very good We focus on this. I think we have never known this before.

Another Bot shows up... Scotrang  :teufel095: