SuzukiHayabusa.org
TECHNICAL => ALL MOTOR TALK => Topic started by: Nosgsx1300 on September 08, 2017, 01:18:16 PM
-
A buddy is having a problem with his 02 Busa
He is getting a false limiter at about 9500 rpm
If the Inlet cam is off a tooth didn't that cause something like this?
-
Start the bike and then unplug the cam sensor while it is running and see if it will rev through the lower issue
-
he says he tried that
Next week when I get a chance I wanna check his Fuel pressure while on road under heavy load
-
Clutch switch?
-
Oh yeah
Clutch switch,,,, I am going away this wekend, but I will message him to check
:punk:
-
We had a faulty gear position sensor which was showing only neutral and it lowered the limiter