SuzukiHayabusa.org

TECHNICAL => MODS => Topic started by: Jeremygg1283 on September 04, 2018, 11:27:39 AM

Title: “BEST CHAIN” for strip and some street. New swingarm 9 to 11”over
Post by: Jeremygg1283 on September 04, 2018, 11:27:39 AM

Hello everyone,
I have a gen 1 Hayabusa with R1 rims. 44 tooth in back and a 16 in front. Would it be wise to use a non o ring chain if I ride this on the street every once in a while? Its mostly a strip bike. I dont mind keeping up on  the maintance with it.  Im under 200 hp. Will spray in future.

What chains are best for this? I think 160 links in what will be needed. Thanks in advnace guys.

Title: Re: “BEST CHAIN” for strip and some street. New swingarm 9 to 11”over
Post by: Red on September 04, 2018, 04:18:48 PM

NOPE •

Get a strong chain !

Title: Re: “BEST CHAIN” for strip and some street. New swingarm 9 to 11”over
Post by: Jeremygg1283 on September 04, 2018, 07:15:30 PM

What is the best chain to run?

Title: Re: “BEST CHAIN” for strip and some street. New swingarm 9 to 11”over
Post by: turbojonn on September 04, 2018, 09:25:44 PM

EK 3D for sure. Highest tensile strength, o-ringed. They,ll handle all the torque you can throw at them.

Title: Re: “BEST CHAIN” for strip and some street. New swingarm 9 to 11”over
Post by: STUNNAH on September 04, 2018, 09:45:50 PM

Quote from: turbojonn on September 04, 2018, 09:25:44 PM

EK 3D for sure. Highest tensile strength, o-ringed. They,ll handle all the torque you can throw at them.

What he said...Really no need for a straight drag racing chain, I trashed one the first launch at the strip not as tough as their supposed to be, less than 300hp...