SuzukiHayabusa.org

TECHNICAL => HELP! => Topic started by: crackerjacks on February 03, 2019, 07:03:16 PM

Title: drive shaft length
Post by: crackerjacks on February 03, 2019, 07:03:16 PM

Posted on other forums but ill try here as well, I have a 04 busa, got a motor from a 07 but the 07 drive shaft is 1/4 longer than one on my 04 motor and spline are thicker, I know from a poster on another forum they should be the same , so not sure if suzuki late 07 started putting diff trans in those bikes ahead of the gen 2 or what? any ideas thans

Title: Re: drive shaft length
Post by: Stainless1 on February 03, 2019, 09:07:53 PM

Is it 11 splines?  Someone might have put a HD tranny output shaft in it... should be the same length to  the  sprocket

Title: Re: drive shaft length
Post by: firemanjim on February 06, 2019, 11:21:47 PM

Got pics??

Title: Re: drive shaft length
Post by: Red on February 07, 2019, 04:05:19 PM

Quote from: firemanjim on February 06, 2019, 11:21:47 PM

Got pictures ?  ?  ?

(https://www.hayabusa.org/forum/attachments/92d6847d-e378-4bae-ac3f-04d7381c4d2b-jpeg.1593729/)

(https://www.hayabusa.org/forum/attachments/e836ded5-93fe-4f18-a35d-cecbc2b7dc40-jpeg.1593730/)

Title: Re: drive shaft length
Post by: speedduck on February 21, 2019, 08:15:26 AM

It must be a gen2 tranny