SuzukiHayabusa.org

TECHNICAL => MODS => Topic started by: 08BusaD500 on February 17, 2019, 06:59:16 PM

Title: Gen2 swingarm with gen1 wheel
Post by: 08BusaD500 on February 17, 2019, 06:59:16 PM

I have a gen 1 that I want to put a gen 2 stock (lengthened 6 inches) swingarm on. I have a gen 2 caliper and mount. Can I get this to work? Will the gen 1 brake disk work? Do I need to make a new sprocket side spacer and add 6mm to it?