SuzukiHayabusa.org

TECHNICAL => HELP! => Topic started by: HollywoodAlberta on November 08, 2021, 12:39:00 PM

Title: Torque settings
Post by: HollywoodAlberta on November 08, 2021, 12:39:00 PM

I am replacing my exhaust system on a Gen1 and need the torque for the socket heads that bolt the flags to the cylinder head.
Thanks,
john

Title: Re: Torque settings
Post by: Stainless1 on November 08, 2021, 10:33:01 PM

Till the alan wrench flexes about 10 degrees without turning the screw... or 16 lb. ft.