SuzukiHayabusa.org

TECHNICAL => ALL MOTOR TALK => Topic started by: jerry coomer on May 26, 2003, 05:19:00 PM

Title: milling head
Post by: jerry coomer on May 26, 2003, 05:19:00 PM
any body know how many .000 = 1 pt of comp when milling head now my head is stock and it is 19.5 cc  . i have 1397  @.063 total deck flat tops and cyl volume is12cc + 19 cc =31cc=12.05- 1 comp take .020 off block cyl vol is 9 cc + 19.5 cc =13.13-1 comp .does busa motor like 14-1? or is there not much differende between 13.13 to 14-1 ?they told me .039 is as close piston to head as u can get with .020 off block i am at .041 total=13.13 -1 comp is that high enough for drag racing? i want any free power while i am putting together.