SuzukiHayabusa.org
MEMBERS => MEMBER PROJECTS => Topic started by: cstraubs1 on December 14, 2003, 07:44:00 PM
-
This was last years build up on my bike. This year plans,include paying off the credit card for all this crap!!! (http://images/smiles/converted/lol.gif)
This is how I bought the bike,99 Mr.Turbo..200hp
(http://images.snapfish.com/3394682323232%7Ffp65%3Dot%3E2327%3D%3B26%3D825%3Dxroqdf%3E2323349%3A975%3B4ot1lsi)
Frame rake by McIntosh..same day service...sweet!!!
(http://images.snapfish.com/3394682323232%7Ffp67%3Dot%3E2327%3D%3B26%3D825%3Dxroqdf%3E232335378453%3Bot1lsi)
NLR small KKK kit..bought from Motorhead...
(http://images.snapfish.com/3394682323232%7Ffp65%3Dot%3E2327%3D%3B26%3D825%3Dxroqdf%3E2323353784542ot1lsi)
FBG undercut tranny with HD output shaft,APE bottom end studs,HV oil gear,and THE MOTORHEAD SUPER STUDZ!!!
(http://images.snapfish.com/3394682323232%7Ffp66%3Dot%3E2327%3D%3B26%3D825%3Dxroqdf%3E2323353784563ot1lsi)
(http://images.snapfish.com/3394682323232%7Ffp7%3Enu%3D3236%3E%3A35%3E734%3Ewsnrcg%3D323249%3C7%3A5%3C%3A7nu0mrj)
(http://images.snapfish.com/3394682323232%7Ffp3%3B%3Dot%3E2327%3D%3B26%3D825%3Dxroqdf%3E23233%3A%3B896%3B%3B8ot1lsi)
(http://images.snapfish.com/3394682323232%7Ffp7%3Enu%3D3236%3E%3A35%3E734%3Ewsnrcg%3D323249%3C%3B%3C3325nu0mrj)
Thats at 24lbs of boost...
-
sweet bobby ! i guess we be representin the 99's the way they should have been built (http://images/smiles/icon_wink.gif)
hey man i see you have your pivot links on the middle hole . did you just take out preload to get the ass down that low or what ? i have mine on the lowest setting and took some preload out but i want it lower still . might make my own links , im afraid of making the ass squat too much . i see where the back tire has been into the subframe before but i just mounted a steel subframe and cut the center bar out since the latch is useless . im also building a weld on support for the ext. tail . (thats why i went with steel)
-
I got some longer dogbones..think they might be for a gixxer.I cut the rear subframe bracket(that latches the seat) and welded a 1/4" piece of strapping for an extra 3/4" clearance....