SuzukiHayabusa.org

GENERAL => MAXIMUM OVERDRIVE => Topic started by: GONE-N-60-SEC on April 06, 2004, 02:17:28 PM

Title: WHAT IS THE TOP SPEED WITH A 16 TOOTH ON FRONT?
Post by: GONE-N-60-SEC on April 06, 2004, 02:17:28 PM: i have muzzy full system k&n small air box mod.and plus 5 with a yosh box.and i was wondering what the top speed would be with the 16 on the front.
Title: WHAT IS THE TOP SPEED WITH A 16 TOOTH ON FRONT?
Post by: JHerheim on April 06, 2004, 06:44:44 PM: 190.4 mph @10800 on 16 t front assuming that you have 99-00 or TRE, no wind or enough road.

Calculated with tire circumference of 76.91 inches 190/50/17
Title: WHAT IS THE TOP SPEED WITH A 16 TOOTH ON FRONT?
Post by: BiggerDanno on April 06, 2004, 07:07:56 PM: My actual at 2400' elevation in about 1 mile was 178mph.
With a bit more room it would have went a little faster.
Title: WHAT IS THE TOP SPEED WITH A 16 TOOTH ON FRONT?
Post by: GONE-N-60-SEC on April 06, 2004, 09:05:45 PM: i'm going to run the texas 1 mile and i wasn't sure witch sprocket to run.17 or 16.i'm going to run the 185mph class.
Title: WHAT IS THE TOP SPEED WITH A 16 TOOTH ON FRONT?
Post by: Steve A on April 08, 2004, 09:12:03 AM: Think you'd be a lot better off with the 17T !!!
Title: WHAT IS THE TOP SPEED WITH A 16 TOOTH ON FRONT?
Post by: HighOnBusa on April 11, 2004, 04:14:08 PM: I ran 176 with a similar setup. (GPS). 178 with a nice tail wind. . I run a 17/41 combo now and like it alot better.
Title: WHAT IS THE TOP SPEED WITH A 16 TOOTH ON FRONT?
Post by: HighOnBusa on April 11, 2004, 04:24:46 PM: I ran mid 176 with a similar setup. (GPS).
Title: WHAT IS THE TOP SPEED WITH A 16 TOOTH ON FRONT?
Post by: RansomT on April 12, 2004, 10:27:24 AM: I run in the mid-180s (183-184) on a completely stock '03 using the stock 17/40 at Maxton.
Title: Top Speed
Post by: Ezzy on April 16, 2004, 05:27:19 AM: I shift out of 5th gear at 185 (11000rpm),it will drop to 180 during shift (because of drag) and it will generally drop to about 9500 rpm @180-185
and run on up to about 197 in 6th @ 10500 . sometimes you will have wind shear problems...(scary) the bike will roll about 10 degrees to either side and straighten as you let off throttle. I got video id you'all would like to see.... :shock:
Title: WHAT IS THE TOP SPEED WITH A 16 TOOTH ON FRONT?
Post by: fstbusa on April 18, 2004, 06:54:10 PM: post up the vid
Title: gearing maxton
Post by: gjp1300 on April 27, 2004, 06:40:25 PM: I went to Maxton 3 yrs. ago and started out with a 16/40 gearing and was hitting the limiter before the traps and went 183 mph,which I knew it was going to be from top gear dyno tests.I then changed back to the stock gearing 17/40 and ran 188 mph which was my best,the bike was showroom stock,airbox,exhaust, height,and mirrors.Iwas going for Scott Gunthries record of 192mph all stock,but the weather was way to hot 98 and humid.My bike was making 160 hp on the dyno so If you have a pipe and you drive it you should hit the 190's,I would bring a 39 and a 38 :lol: rear just in case you run out of gear. I ran another busa with the intake cam on the exhaust side and a pipe,he said it was making around 175 hp and went 197 mph so you could theoretically be in the middle.Theres alot of variables though weather conditions and how big you are and how good you tuck.The most important thing you want to do is short shift 1st and 2nd at 9000 rpm and bring 3,4,5,to redline cause you want to get into top gear sooner.Try 1 and 2 first then goto 3rd and see how you do.I went there shifting every gear at redline just like I was dragracing till someone gave me a that advice and then bam 188 mph,it worked.You see you can short shift 1,2,and possibly 3 and you still have enough torque to pull hard in 4th.It worked for me hope it works for you.
Title: WHAT IS THE TOP SPEED WITH A 16 TOOTH ON FRONT?
Post by: GONE-N-60-SEC on April 27, 2004, 08:21:19 PM: thanks i will try that.my size and weight are not going to help though.6'4"-250.but i'm still pretty fast.i can out run my buddy with the same set up till 170-175 and he's at 5'9-160. 8)