SuzukiHayabusa.org

TECHNICAL => LITER BIKES => Topic started by: Launch1300 on June 26, 2005, 02:58:57 PM

Title: 02 GSXR 1000 Head gasket. How thick??
Post by: Launch1300 on June 26, 2005, 02:58:57 PM

Whats the stock head gasket thickness on a 02 1000?
Wanting to to go about 0.10 thinner. Porting head and 750 springs.
Thanks.

Title: Re: 02 GSXR 1000 Head gasket. How thick??
Post by: SPEED KING on June 26, 2005, 03:21:55 PM

Quote from: Launch1300

Whats the stock head gasket thickness on a 02 1000?
Wanting to to go about 0.10 thinner. Porting head and 750 springs.
Thanks.

Don't worry about what the gasket thickness is unless you already know what the Deck height is for the combo you are going to run.

Cometic sells thinner head gaskets..and thicker gaskets also if you order them custom.

So what is your deck height now..?....and don't say stock.. :P

Title: 02 GSXR 1000 Head gasket. How thick??
Post by: Launch1300 on June 26, 2005, 04:35:16 PM

Ah. The wise one has spoken. :lol:
I'll haffta have it checked. Cause i damn sure don't know how.
After getting that handled, then what? Forgive me for my ignorance.
Thanks for the info in advance John.

Title: 02 GSXR 1000 Head gasket. How thick??
Post by: SPEED KING on June 26, 2005, 04:38:39 PM

Quote from: Launch1300

Ah. The wise one has spoken. :lol:
I'll haffta have it checked. Cause i damn sure don't know how.
After getting that handled, then what? Forgive me for my ignorance.
Thanks for the info in advance John.

Oh stop it, I just want to make sure that you don't end up with a squish height that is too close and kill the engine because your higher compression engine will not allow the rod and pistons enough clearance..

Let us know..
 :yes:
J

Title: 02 GSXR 1000 Head gasket. How thick??
Post by: Launch1300 on June 26, 2005, 04:48:51 PM

Will do. Thanks again.