SuzukiHayabusa.org
TECHNICAL => NITROUS => Topic started by: 02 busa se on July 16, 2005, 05:06:48 PM
-
I finally got a Power commander... right now Im spraying on the IAT sensor..with not much luck, I want to move the fogger and use the powercommander to richen things up...now..is it as easy as adding 2-3 bars at the high side..or does someone have a good map?
-
Where is your fogger located and how big of a jet are you using?
You don't want to spray directly on the A/F sensor, you will freeze it.
-
the fogger is right behind the IAT, fan nozzle, maybe a 1/4 of the fan hitting the sensor ( took the lid off and checked) . I have a "24" jet in it now...suppose to be 25HP, but I dont feel a thing...thought it was my bottle mounting, but I put a 2lb bottle in the hump and same thing, granted I ran the same time with being 2 tenths slower off the line, so it might have added a little. the way it is I dont see it getting to all the cyl equally. Stock airbox, stock filter. Maybe another fogger on the other side..Im open to ideas
-
I like 2 nozzles all short stacks and a air box mod / No filter when spraying and it seems to work pretty good,You could bump Your PC all the way up using the buttons and/or go into the map and add fuel for the top end WOT.
From what I heard If you spray on or real close the sensor it will advance Your timing also..something You dont want to do while spraying,,if anything you might want to take a few degrees away if Your spraying alot..
:shock:
-
thanks for the info..Ill try 2 nozzles, bump up a few bars and see.
-
I bumped Mine all the way up!!!!! :shock:
-
Mines got the 32 shot and the map i have for just the Muzzy pipe was all it needed.. My nozzle is mounted front and center and was good for 32 extree HP