SuzukiHayabusa.org

TECHNICAL => ALL MOTOR TALK => Topic started by: 00red on April 23, 2006, 08:30:02 PM

Title: degreeing stock cams
Post by: 00red on April 23, 2006, 08:30:02 PM

what lobcenters for two intake cams setup.

Title: Re: degreeing stock cams
Post by: busamagic on April 23, 2006, 08:56:42 PM

105/105

Title: Re: degreeing stock cams
Post by: 00red on April 23, 2006, 09:06:44 PM

thanks

Title: Re: degreeing stock cams
Post by: BBP1 Busa on April 24, 2006, 12:44:18 PM

Quote from: 00red on April 23, 2006, 08:30:02 PM

what lobcenters for two intake cams setup.

I also have the two intake cams on mine... I degreed the cams at 106 In 108 exh. The bikes makes very good power and lots of torque to, also ride two up about 25 -30% of the time.   Some food for thought!  :wink:

 P: