SuzukiHayabusa.org
MEMBERS => MEMBER PROJECTS => Topic started by: ChrisCoupe on May 27, 2006, 03:21:48 PM
-
well started off as a 04 LE stocker when it began.............then went to a alabaster white 04 LE thanks to rob kelly.......as far as mods went well BDE gen 3(full ti system).....KN high flow filter.....TRE.....ram air scoops......pair block offs.......-1 in the front.......dog bones in the rear at second hole and strapped front.......oh yeah and a 50 shot dry kit.....which blew the motor due to an idiot install(oh well time to open her up and the 1397 begins.........)..........few other lil goodies but i forget right now???
pics of her after those mods..........
(http://i38.photobucket.com/albums/e120/Chriscoupe/chrisbike4.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/chrisbike2.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/chrisbike5.jpg)[/img]
hmmmmz somthing is missing here :P.............
(http://img.photobucket.com/albums/v207/469boy/100_2147.jpg)
and a few picks of the block opened up.......i have some damaged motor pics somewhere but have to find them first........
(http://img.photobucket.com/albums/v207/469boy/100_2160.jpg)
(http://img.photobucket.com/albums/v207/469boy/100_2161.jpg)
-
ill get pics and post them of the 1397 motor work soon enough........and picks of the new 4-6 over TSP chromoly arm(powdercoated black) soon also........till then stay tuned.......
-
Heres a pic of the 4-6 over TSP chromoly arm(powdercoated black)............
(http://i38.photobucket.com/albums/e120/Chriscoupe/untitled.jpg)[/img]
-
Here are a few picks of the port work that was just recently done to the head.......
(http://i38.photobucket.com/albums/e120/Chriscoupe/100_2577.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/100_2581.jpg)[/img]
and a close up here......
(http://i38.photobucket.com/albums/e120/Chriscoupe/100_2579.jpg)[/img]
-
A rear of the head shaved down..........dam thats some good head.... :lol:......nice and clean !!!....... valves havent been replaced yet !!!........view of the valve job too.........
(http://i38.photobucket.com/albums/e120/Chriscoupe/100_2582.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/100_2583.jpg)[/img]
-
More goodies arrived...........Powerful Bling :wink: :D :D :D
(http://i38.photobucket.com/albums/e120/Chriscoupe/100_2573.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/100_2576.jpg)[/img]
Stay tuned..........More to come !!!
-
damn son. nice stuff ya got there.
keep taking pics of everything during the install. its worth it looking back at the project.
keep us updated
-
Nice looking cylinder head! That will be a fun bike to ride. Good luck
-
Thanks guys..........i have been very patient with this build and hopfully its all gonna be worth it in the long run.........well mostly the 9/10ths and mile run...... :P
Ill have more progress sometime next week......pics and should have some baseline dyno numbers.......
-
looks good :beechug:
but I would get better clutch springs I like the ones Brock sells but Motorheads and APE's are good too
also I would get the spencer clutch support bracket it's much stronger
http://www.spencercycle.com/Hayabusa_Clutch_Slave_Cylinder_Brkt_p/exo-1103.htm
what happened with the dry kit was that the one 469 Boy posted were the nozzle was mounted between 1 and 2 cylinders in the air box.
-
Yeah thats the one .......still have the kit it but we relocated the nozzle to the correct area and we are upping the jets ...ill be spraying between a 60-80 shot .........on this set up.........havent changed out the rods yet so we are gonna stay right under the 300 mark with the spray..........when i change the rods ill be going with a wet system and better fuel system ......then aim for some real power....... :twisted:
Right now it should pull through to be a mid 8 sec bike with the right seat time and set up but ill be doing alot more 9/10ths and mile runs with it........South Florida Home of 9/10ths !!!
-
did you get any money from the guy that installed it?
-
Nope......went through the bullshit mechanic fight.......he said that this guy wants your business and he is fucking yu and i knew that wasnt the case so after all the bullshit was over i basically said no sense in beating a dead dog.......but he lost in the long run because i had prolly close to 6-8 consistant customers that he will lose out on business in the long run......a few of them were gonna spend decent dollars this year too.......his fuck up and he couldnt even meet me half way........fuck him........when i get back to south florida im gonna try to hustle some money out of him by racing a few of his bikes that he built........ill get my money back one way or another...... :lol:
-
ok guys its getting there..............just got the block back from those boys at millenium and lets just say they arent the best in the business for no reason........the block is prime......
what could this be ??? :twisted: :twisted: :twisted:
(http://i38.photobucket.com/albums/e120/Chriscoupe/MillenniumTechnologiespic.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/Blockpic.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/Block3.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/Block2.jpg)[/img]
piston install and placement into the block........and some good TDC action :D
(http://i38.photobucket.com/albums/e120/Chriscoupe/pistonshot.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/pistonsontherodspic.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/pistonsandblockTDC.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/TDCpic.jpg)[/img]
getting ready for cam placement and degreeing.........nice valve shot !!!
(http://i38.photobucket.com/albums/e120/Chriscoupe/valveshot.jpg)[/img]
intake on exhaust side and brocks spec cam on intake side.......very nice combo for the money..... :wink:
(http://i38.photobucket.com/albums/e120/Chriscoupe/camsandportwork2.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/camsandportwork.jpg)[/img]
for the most part finished product....... :D
(http://i38.photobucket.com/albums/e120/Chriscoupe/completelongblock.jpg)[/img]
Gotta plug the guys over at millenium again for the fine work they do over there......thanks guys........
Stay tuned more to come........
-
hurry up, we gotta ride before i head to panama city.
-
Looks great, looking forward to seeing it pull away from me :lol:. If I'm back on the road that is.
-
:P
-
I just want you to know, I hold you personally responsible for making me want a 1397 now and having spent the last 48 hours researching the ins and out and asking ppl questons on how to go about it and what to do. DAMN YOU! :evil:
-
Degreeing the cams and its just about finished................cant wait!!!
(http://i38.photobucket.com/albums/e120/Chriscoupe/camdegree1.jpg)[/img]
(http://i38.photobucket.com/albums/e120/Chriscoupe/camdegree2.jpg)[/img]
-
mimic its a virus and its got yu to now......... :lol:
-
as far as hp well rob thinks 210+.....matt wright says 215+... :P....i just hope the fucker runs hard.......on the bottle well im trying to stay right under the 300 mark due to stock rods.....changing those when i go wet sooner then later.......
Compression with the head shaved and thin gasket will be around 13.1.......pistons are 12.8 forged JE's.......
As far as the bike in a whole......Lets just say rob is the fucking man.......and i mean whole......core to exterior...... :wink:......and for the most part yes the motor has been built from the ground up.......due to a nitrous fuck up ....been the best thing for it since i blew it a while back!!!! :evil:.........all is good now :twisted:
Engine stand well i held it all up by hand the whole build ....yup all myself...... :lol:.......yeah right!!!......again rob is the man!!! :wink:
-
Looks great Chris, but don't get gready with that spray. Those stock rods won't hold 300 nitrous hp. You've built a nice little power plant. Don't cut it in half.
-
just about finished..........
(http://i38.photobucket.com/albums/e120/Chriscoupe/nearfinishedproduct2.jpg)[/img]
-
When are you gonna be in Jax?
-
Hey Matt. :wink: How is the build on Bill's bike going?
He is riding it to much to work on it . There is some trick stuff on it!!!
-
T88 vette for the lose i got a vid man sweet
-
T88 vette for the lose i got a vid man sweet
Also heard a nitrous busa felt the heat lastnight :wink: btw he is running all motor we never got the nitrous tuned .
-
where's the finished pics????????
-
2 more weeks till i get out of school until then sorry ........school is my priority at the moment .....its a one time shot at the railroad and i cant think about nothing but that being that i am not a school person......i have them already just have no time to load them and post em up at the moment....well back to school and studying...... :D
-
The bike is tore apart and sold all into pieces currently.......
Project number 2 coming to a theater near you soon enough....... :P
oh yeah sorry for no finished pics they got erased off my email and camera so i have nothing to post at all....... :?
-
The bike is tore apart and sold all into pieces currently.......
Project number 2 coming to a theater near you soon enough....... :P
oh yeah sorry for no finished pics they got erased off my email and camera so i have nothing to post at all....... :?
WOW this was like a wet dream gone bad I was super stoked to see the end and you just gave me blue balls ya ass :lol: :lol: :lol: I am in the same boat as mimic I want to go 1397 so you had me hooked like a fish.......
-
I have soome hold on :wink:
-
(http://img.photobucket.com/albums/v207/469boy/100_2637.jpg)
(http://img.photobucket.com/albums/v207/469boy/100_2641.jpg)
-
what exactly was the nos fuck up? what happened?
Long story i sold Chris a nitrous system and he had a guy install it in florida and well needless to say the guy didnt know what the fuck he was doing. So he sent me the bike and i rebuilt it and fixed everything. He might be able to tell you if the bike Runs or i should say ran strong :wink:
-
right on :wink: I'm doing a dry kit soon just curious so I didn't end up doing the same thing :P
the guy installed the fogger in between the 3 4 velocity stack so those cyl went wayyyyyyy lean and melted shit
(http://img.photobucket.com/albums/v207/469boy/1111.jpg)
(http://img.photobucket.com/albums/v207/469boy/121212.jpg)
-
lean is mean
ya and so is
GREEN :evil: beware of the Shamrock LOL
Im board
-
booger racing. they kick the snot out of the competetion. :lol:
-
right on :wink: I'm doing a dry kit soon just curious so I didn't end up doing the same thing :P
the guy installed the fogger in between the 3 4 velocity stack so those cyl went wayyyyyyy lean and melted shit
(http://img.photobucket.com/albums/v207/469boy/1111.jpg)
(http://img.photobucket.com/albums/v207/469boy/121212.jpg)
am i seeing that right?? in the back of the airbox is the fogger between cyl 3-4.. wtf??
-
booger racing. they kick the snot out of the competetion. :lol:
i just seen that fucker
you wanna get the next lane?
:lmao:
:lol:
-
right on :wink: I'm doing a dry kit soon just curious so I didn't end up doing the same thing :P
the guy installed the fogger in between the 3 4 velocity stack so those cyl went wayyyyyyy lean and melted shit
(http://img.photobucket.com/albums/v207/469boy/1111.jpg)
(http://img.photobucket.com/albums/v207/469boy/121212.jpg)
am i seeing that right?? in the back of the airbox is the fogger between cyl 3-4.. wtf??
Yes Sir, Dum people
-
booger racing. they kick the snot out of the competetion. :lol:
i just seen that fucker
you wanna get the next lane?
:lmao:
:lol:
yes, and im gonna need 10 and the hit, n/a vs n/a :bah: