SuzukiHayabusa.org

TECHNICAL => MODS => Topic started by: 03 silver busa on July 02, 2006, 04:55:38 PM

Title: Need help ASAP on Carb sync
Post by: 03 silver busa on July 02, 2006, 04:55:38 PM

I am trying to sync my throttle bodies.  When I get 1 and 2 or 3 and 4 set if I leave the bike run long enough the rpms will change and then my sync is off.  Is it normal for the levels to change when the idle fluctuates??  Help would be greatly appreciated as the bike has been apart all afternoon. 

Title: Re: Need help ASAP on Carb sync
Post by: atticdog on July 02, 2006, 05:49:22 PM

the left screw balances  1 and 2 the right screw balances 3 and 4
then the center screw balances 1,2 with 3,4
just making sure your doing it right
here is jinksters post with pics
http://www.hayabusa.org/cgi-bin/busa/ikonboard.cgi?s=8a8f2f391196e2fd1faefcbb93cd5976&act=ST&f=24&t=41476

Title: Re: Need help ASAP on Carb sync
Post by: 03 silver busa on July 02, 2006, 06:54:32 PM

I got that part.  When I get 1 and 2 close or 3 and 4 doesn't matter, if the rpm's change then so does my reading and then they are not close anymore.

Title: Re: Need help ASAP on Carb sync
Post by: atticdog on July 02, 2006, 07:11:12 PM

is your idle around 1100? first

Title: Re: Need help ASAP on Carb sync
Post by: 03 silver busa on July 02, 2006, 07:14:09 PM

Yes