Haybusa Parts and Service Member Support

Author Topic: Question about BTC (A&J) box  (Read 2182 times)

Offline chevelle

  • Post Whore
  • ****
  • Posts: 940
  • Gender: Male
Question about BTC (A&J) box
« on: June 17, 2007, 08:36:25 AM »
Can the fuel enrichment be disconnected ? While still maintaining the w.o.t. and gear to activate features.

Offline BATTMAN

  • Mad Post Whore
  • ******
  • Posts: 4032
  • Gender: Male
Re: Question about BTC (A&J) box
« Reply #1 on: June 20, 2007, 08:44:54 AM »
That's a good question.  You would have to know alot about the internals of the box.  Why would you want to cut the fuel off though?  Waht are you going to use to get the added fuel while you are spraying?

Offline chevelle

  • Post Whore
  • ****
  • Posts: 940
  • Gender: Male
Re: Question about BTC (A&J) box
« Reply #2 on: June 20, 2007, 11:32:51 AM »
Long story short,under the right conditions i can max the injectors out. On the 02 and up,when you max the injectors they shutdown.

If i just add the required fuel to the map,i shouldn't come any where near maxing the injectors.

In the meantime,i have put a few bandaids on. Dropped the jet from .040 to .037
Pulled 2 degrees of timing out.
Put the short arm on the bike,and the bottle back in the trunck. B/P is down about 200 lb's (lots of motor heat on the arm) from 1050 to 850.
Ran a few tanks with injector cleaner. Will give it a try in the next few days.
« Last Edit: June 20, 2007, 02:02:53 PM by chevelle »