stealth mode! yeah, stealth mode is very handy.
ok pay careful attention...
i small 2 conductor toggle (it can be small because there is no load on it).
- one end of the switch goes to the ignition source (like the aux plug under right side panel)
- other side of the swith goes to a relay (terminal #85)
now you need a 5 prong automotive relay (must be 5 terminal with 85 86 87 87a and 30).
- wire from terminal of switch goes to #85.
- terminal 86 goes to chasis ground.
- terminal 30, unhook ground from headlight and taillight and put it here (lengthen them).
- terminal 87a, from here, to the ground of the taillight and headlight.
- terminal 87 is not used.
at rest the normally closed circuit keeps the headlights and taillights working normally.
when the relay is activated, it opens the circuit and takes ground away from the lighting.
very simple circuit.
but at first, it out took me quite a while to figure that out.
i wish i had somebody to ask and tell me this stuff...
the turbo timer in more involved and it requires a pulse timer relay....
get one.
http://www.amazon.com/DEI-528T-Pulse-Timer-Relay/dp/B0009IR4AConce you get that,
ill tell you what to do.
another simple curcuit but you will need 2 more relays.