Haybusa Parts and Service Member Support

Author Topic: who sells a 10mm comp. gauge  (Read 9246 times)

Offline crazybill

  • Mad Post Whore
  • ******
  • Posts: 4220
    • www.PortTechHeads.com
who sells a 10mm comp. gauge
« on: November 29, 2002, 04:55:00 PM »
or an adapter for my 14mm ????? last time i asked i got no responses . one of you vendors has to have access to these !!!!
“Nobody can be so amusingly arrogant as a builder who has just discovered an old idea and thinks it is his own.”

Offline blowerbike

  • Post Master
  • *****
  • Posts: 1144
who sells a 10mm comp. gauge
« Reply #1 on: November 29, 2002, 05:03:00 PM »
bill, i would think mac, or snapon. not sure though. maybe schnitz  

Offline crazybill

  • Mad Post Whore
  • ******
  • Posts: 4220
    • www.PortTechHeads.com
who sells a 10mm comp. gauge
« Reply #2 on: November 29, 2002, 05:21:00 PM »
im sure mac and snap-on do . i already have a nice mac 14mm gauge . i was hoping to get around shelling out another fat wad for a second one . like to have somthing (a moderatly priced one) to get me by while cash is tight .  an adapter would be awsome .
maybe ill just spin one up on a lathe....
“Nobody can be so amusingly arrogant as a builder who has just discovered an old idea and thinks it is his own.”

Offline blowerbike

  • Post Master
  • *****
  • Posts: 1144
who sells a 10mm comp. gauge
« Reply #3 on: November 29, 2002, 05:29:00 PM »
the adapter is what i was talking about. no need to buy a new guage. not sure if sears would have one. i'm sure there is a board member here with a company that sells them. maybe joe or someone.  

Offline TaoBusa

  • Post Master
  • *****
  • Posts: 1852
    • Yorihey.com
who sells a 10mm comp. gauge
« Reply #4 on: November 29, 2002, 06:15:00 PM »
I got the hose from Shnitz.

It didn't have the valve on the end, though (I think I was supposed to buy an extra adapter or something). Anyway, I just gutted an old bike tire for the thread, bored it, epoxy glued it into the end and used the valve from the 14 mm. Hopefully you don't go through that crap.

Offline HOG SLYR

  • Post Whore
  • ****
  • Posts: 980
who sells a 10mm comp. gauge
« Reply #5 on: November 29, 2002, 06:49:00 PM »
I got a nice brass adapter that fits my Snap-On 14mm hose at Kragen Auto Parts. I'm sure the tool trucks can all get them as well.

Offline EZ

  • Rider
  • ***
  • Posts: 180
who sells a 10mm comp. gauge
« Reply #6 on: November 29, 2002, 07:01:00 PM »
the hose that ape sells for the leak down gauge has a quick connect that fits my comp gauge on it.
8.78@170

Offline Jay

  • Post Master
  • *****
  • Posts: 1935
who sells a 10mm comp. gauge
« Reply #7 on: November 30, 2002, 04:25:00 PM »
quote:
Originally posted by EZ:
the hose that ape sells for the leak down gauge has a quick connect that fits my comp gauge on it.

Finally someone said it, so I wouldn't have to and get booted off for good        

Jay

Offline A&J Performance

  • Post Master
  • *****
  • Posts: 1884
    • http://www.A-JPerformance.com
who sells a 10mm comp. gauge
« Reply #8 on: November 30, 2002, 04:27:00 PM »
Jay @ APE

A&J
 

Offline A&J Performance

  • Post Master
  • *****
  • Posts: 1884
    • http://www.A-JPerformance.com
who sells a 10mm comp. gauge
« Reply #9 on: November 30, 2002, 04:29:00 PM »
oops! sorry !
Didn't read all of the posts!

A&J  

Offline A&J Performance

  • Post Master
  • *****
  • Posts: 1884
    • http://www.A-JPerformance.com
who sells a 10mm comp. gauge
« Reply #10 on: November 30, 2002, 04:30:00 PM »
OK Jay!
you owe me some spam !      

A&J  

Offline FastGixx

  • Mad Post Whore
  • ******
  • Posts: 2372
who sells a 10mm comp. gauge
« Reply #11 on: November 30, 2002, 04:42:00 PM »
Bill, I have a complete compression gauge set that I will mail to you next week to borrow if you want.  Its got all the connectors and adaptors to fit any spark plug.  There is even a small gauge for small engines.  

let me know.

Offline Steve A

  • Universal Post Whore
  • *******
  • Posts: 9155
  • Gender: Male
who sells a 10mm comp. gauge
« Reply #12 on: November 30, 2002, 04:48:00 PM »
I think Sears (Craftsman) has an adapter in their Tool Catalog.  Not sure whether it is stocked in all the stores.

Offline crazybill

  • Mad Post Whore
  • ******
  • Posts: 4220
    • www.PortTechHeads.com
who sells a 10mm comp. gauge
« Reply #13 on: November 30, 2002, 05:25:00 PM »
boy do i feel silly...
i was looking at my gauge and noticed the 14mm end was screwed on . what thread was holding it to the hose ? 10mm    
theres no schrader valve in it so i have to just watch how high the needle bounces on the compression stroke but i was basically just seeing if i had a valve hanging open . my turbi bike has a consistant backfire through the exhaust... its bouncing to 160psi and its somewhat low compression (10:1 and it has .020 under the block).

jay , does the adapter you sell have the schreder valve and how does it connect to the gauge exactly ? price maybe ?
surley its ok since im asking  
“Nobody can be so amusingly arrogant as a builder who has just discovered an old idea and thinks it is his own.”

Offline Jay

  • Post Master
  • *****
  • Posts: 1935
who sells a 10mm comp. gauge
« Reply #14 on: November 30, 2002, 07:22:00 PM »
Bill;
The end of the hose has a male quick disconect that plugs into our leakdown tester. There is no valve in it.
On the fitting it says, PCC SERIES D.

You can find it here;
http://www.gsxrzone.com/tools.html

If this gets me booted, friends, it has been nice chatting with you. See you at Psychobike

Jay