Front tire spin! Part II

[juice]

OK! remember with the old rotors it did not spin good.(not even 1 time around.)So now i swap rotors from my other busa that spun almost 2 times around.I put both new rotors on my rim and installed and the fu#king thing still binds(not even 1 revalution.    I put my so called warped rotors on the other busa and BAM 2 times around.WTF!!!
These are the new forks.Could it be the rim is maybe bent.They never said anything about the rim being bent when I took it to computrac after the accident.I'm gonna swap rims tommorow and see what happens.    
Fu#k I hope it's not the rim.I just had it painted and polished.
When they reinstalled the tires on the rims wouldn't they of noticed if it was bent when balancing the tire?
Going to fu#kin sleep!
Thanks!
Juice

[THEMOTORHEAD]

depress the pistons all the way!!!!
seals can have a memory and cause drag

[juice]

quote:Originally posted by MOTORHEAD:
depress the pistons all the way!!!!
seals can have a memory and cause drag

I'll try that tommorow before the wheel swap.Should i remove the pads and lube the pistons and seals at all?(I'm desperate at this point)Fu#k I just want to be done with this sh#t!
Thanks dennis!
Juice

[THEMOTORHEAD]

na just try this first
make sure you get em pushed way in and pump slowly till they make contact

[juice]