Alright an update has been due. Just got my front end work all in recently and decided to get worknig on the bike more. I might stick with the stock exhaust, or go for a simple slip on exhaust and sell the other exhaust I bought.
Did some major work on the bike yesterday, worked on it up until 5 am because of wiring. Anyway, what was done was wiring in the taillight and signals, plus the headlights and front signals, then putting the exhaust back on, figuring out that the gas tank has rust in it and dirt and other ****. Pulled off the carbs, cleaned the bowls. Set them back up, got everything all buttoned in and threw the tank on from the other bike and fired it up. Still have the same idle problem. So now it's narrowed down to A/F mixture, or throttle handle.
The wiring problem I had was that I had no speedo/tach/headlights with ignition on. Scratched our heads all night Saturday night, and then finally just solved the problem today. Also pulled off the caliper, and the piston is seized, so that needs to be replaced.
I do not need clip-on bars, and I don't exactly need lowered bars, but shorter bars are in order. Next in line is the ram air tube design, new caliper, new gas tank, and then a seat. I'm toying with the idea of getting the side farings for the busa. Also going to be maknig my own fender cover so it fills in a bit of the gap.
Anyway, enough yapping, more pictures. A
video is also available.
Btw the bike is up on a milk crate in these pics. Looks better on the ground.