hahn port fueller

[glenn71]

Has anyone fitted this under a standard airbox non turbo application.I know its expensive but seems to mimic the gen 2 setup.Also the opportunity to run a wet shot through it without fuel in the airbox sounds possible.

[Coryonbusa]

The port fueler injector module inreases fuel with boost pressure. With no boost pressure the module is worthless.
You'd have to figure someway to control the PF's injectors via. RPM/Throttle position.
Maybe with another PC?

[Oz Booster]

If you want the gen 2 injector setup,gen 2 cyls ,probably gen 2 crank...
Buy Bruces bike..., changover on yours will be less cost than all the mods.

[glenn71]

mines too far gone.would be 5-7k changeover before mods for a 20kg heavier bike.Just thinking outside the square as usual.theport fueller could be run by a bazzaz unit or a separate pc.

[crazybill]

We do that using re-racked 05 1k throttle bodies . It requires some modification to the rear lower area of the airbox but its no big deal at all . 
 what are you planning on using to control the injectors so they ramp in with your nitrous ? We had a custom controller made .
Or are you talking about mounting wet nozzles where the injectors were ? Ive considered that as well....

First one we did I actually moved the outer ports of the head inward to fit the throttle bodies but that was very time consuming both maching the head then working the ports out . VERY expensive way to do it ! I love that head though . It works phenominally .

[glenn71]

what about an 08 head,bodies,bazazz unit and modded airbox.

[plat03busa]

where can I find info about the Hahn port Fueler... to buy 1

[glenn71]

hahn turbo systems

[plat03busa]

gotcha