Author Topic: Mike-Nightrider - Turbo Hayabusa (Read 422505 times) Tweet

Mike-Nightrider · « **Reply #100 on:** February 25, 2009, 01:52:39 PM »

Quote from: Charly, Meanracing on February 25, 2009, 01:03:32 PM

Any pics of the beast him self mike?
i just cut the rails and new body work the engine is now apart waiting for new bearings and rods shaft pistons i will post some
i putting together

Sorry Charly.
These are the current pics of my new bike

Not very nice at all.
But the good news are, that Ive got all the parts I need for the new bike.

Dutchman · « **Reply #101 on:** February 25, 2009, 02:08:56 PM »

Are you going to luckau in april?
if so we will drink a couple of beer

so big plans for this project mike
nice parts you have there too we wanna see good numbers this year in holland guys are affraid now
when i run the 8.07 some guys even drop off the ssb class this year so do youre thing lets put some times

Mike-Nightrider · « **Reply #102 on:** February 25, 2009, 05:01:00 PM »

Quote from: Charly, Meanracing on February 25, 2009, 02:08:56 PM

Are you going to luckau in april?
if so we will drink a couple of beer
so big plans for this project mike
nice parts you have there too we wanna see good numbers this year in holland guys are affraid now
when i run the 8.07 some guys even drop off the ssb class this year so do youre thing lets put some times

Yes, Im in Luckau for sure. Ive still put the bottles on ice

And I will take a sec. chain with me if you need one

It was very impressive to run against you in the half final last year in Drachten.
What a bummer that you have not hit the 7s. It was so close.
Perhaps we can rerun our race a little bit faster this year. Perhaps

Best regards to you and your team...

Mike-Nightrider · « **Reply #103 on:** March 02, 2009, 02:46:36 PM »

What a boring day

Weather is bad here and the frame is still at the powder coater.
Ive cut the taillight out of sheer boredom

Mike-Nightrider · « **Reply #104 on:** March 07, 2009, 06:45:34 PM »

Today I was very productive.
Ive disassembled the engine.
OK, most of you would say: How boring !
But it was the first time for me to open a Hayabusa engine.

And I was very curious about the condition of the "new" used engine.

Mike-Nightrider · « **Reply #105 on:** March 07, 2009, 06:48:00 PM »

Pistons

Cylinder

Mike-Nightrider · « **Reply #106 on:** March 07, 2009, 06:49:48 PM »

Rods

Clutch side

Mike-Nightrider · « **Reply #107 on:** March 07, 2009, 06:51:03 PM »

Upper Case

Mike-Nightrider · « **Reply #108 on:** March 07, 2009, 07:01:51 PM »

And now.......

Thanks God, everything is in nice shape

Mike-Nightrider · « **Reply #109 on:** March 07, 2009, 07:02:56 PM »

Oh, I forgot the tranny.

Nem · « **Reply #110 on:** March 07, 2009, 07:39:53 PM »

Nice....

Mike-Nightrider · « **Reply #111 on:** March 13, 2009, 01:21:10 PM »

Finally the frame is back from the powder coater.
Its black satin-gloss.
I am looking forward to start the rebuild of the bike tomorrow.

TrickTom1 · « **Reply #112 on:** March 13, 2009, 03:00:24 PM »

looks good

Nem · « **Reply #113 on:** March 13, 2009, 03:35:41 PM »

Now get to work

Mike-Nightrider · « **Reply #114 on:** March 13, 2009, 05:01:15 PM »

Quote from: Nem on March 13, 2009, 03:35:41 PM

Now get to work

Yes, Sir

atticdog · « **Reply #115 on:** March 13, 2009, 06:03:33 PM »

Looking good Mike!
I am in the process of installing my turbo finally

Coryonbusa · « **Reply #116 on:** March 13, 2009, 06:09:47 PM »

Looking good!

Mike-Nightrider · « **Reply #117 on:** March 13, 2009, 06:26:12 PM »

Quote from: atticdog on March 13, 2009, 06:03:33 PM

Looking good Mike!
I am in the process of installing my turbo finally

Sound good, lucky guy

Turbo installation will be the last step.......

@ Coryonbusa
Tomorrow (its 1am here) we will cut the fork with your first class instructions Cory

Coryonbusa · « **Reply #118 on:** March 13, 2009, 07:11:24 PM »

Mike-Nightrider · « **Reply #119 on:** March 14, 2009, 06:33:58 PM »

Quote from: Coryonbusa on March 13, 2009, 07:11:24 PM

It is done Cory.

We have cut the forks.
It was no problem with your good instruktion and a liitle bit courage.
Here is the fork from my buddy and teammember Mike. Cut it by 2 1/4". My fork is 2" shorter.
Thanks

Before and after:

Mike

Mike-Nightrider · « **Reply #120 on:** March 14, 2009, 06:35:58 PM »

And a little update of my bike.
Had some problems with the bearings. But everything is in good shape now.

Nem · « **Reply #121 on:** March 14, 2009, 06:42:02 PM »

Damn.....when you change bearings you go all out.....I can imagine if you did a complete overhaul

Mike-Nightrider · « **Reply #122 on:** March 14, 2009, 06:49:33 PM »

Quote from: Nem on March 14, 2009, 06:42:02 PM

Damn.....when you change bearings you go all out.....I can imagine if you did a complete overhaul

Yup, there was too much "sand" in the bearings from sand blasting.
Ive protected the bearings, but the sand has found his way

Coryonbusa · « **Reply #123 on:** March 14, 2009, 07:06:47 PM »

Awesome Mike!

Scary-Jerry · « **Reply #124 on:** March 15, 2009, 03:24:23 AM »

Lookin Good Mike!

News:

Author Topic: Mike-Nightrider - Turbo Hayabusa (Read 422505 times) Tweet