Author Topic: What is everybody running in the 1/4 (Read 22247 times) Tweet

Abusive · « **Reply #25 on:** March 17, 2009, 11:20:10 AM »

I have been 9.53 at 144, bike has full Muzzy system, Air shifter, strap on front and Velocity arm set about 8" back.
I weigh 230 in jean and t-shirt.

New best time of 9.26 at 148! Only difference from above mods is a PCV..

bikefrk · « **Reply #26 on:** March 17, 2009, 02:04:37 PM »

9.70 @146mph

Strapped front

lowered rear

15lbs in the stock rear tire

Akro full Ti system from my Gen1 with NO tuning

foot shifting with broken big toe and very bruised foot

Hope I can put a 9.50 on it this year before I put the airshift and power adder on it.

portagee · « **Reply #27 on:** March 20, 2009, 02:47:18 AM »

bring the air pressure back up and you should see alot more mph. stock tire with 38psi i went hi 1.5 sixty foot times and 153 mph soon youll be mad when all it will do is a 9.50

bikefrk · « **Reply #28 on:** March 20, 2009, 01:07:39 PM »

Quote from: portagee on March 20, 2009, 02:47:18 AM

bring the air pressure back up and you should see alot more mph. stock tire with 38psi i went hi 1.5 sixty foot times and 153 mph soon youll be mad when all it will do is a 9.50

38 PSI????

You have a sticky track there to pull a 1.5 sixty with that PSI!!!!

portagee · « **Reply #29 on:** March 21, 2009, 08:06:26 PM »

our track doesnt have the best prep but its alright. im talking stock wheelbase,stock rear tire and just setting up the chassis as best i could. now i run pilot race with 35 psi and run low 1.5s and best mph was 155 but very consistent 153s. runs 122 in eight and best of 125. why sacrifice mph if ya dont have to? lower the bike as much as possible and set up the rear shock. good luck

00Busa · « **Reply #30 on:** March 26, 2009, 10:36:58 AM »

Quote from: portagee on March 21, 2009, 08:06:26 PM

our track doesnt have the best prep but its alright. im talking stock wheelbase,stock rear tire and just setting up the chassis as best i could. now i run pilot race with 35 psi and run low 1.5s and best mph was 155 but very consistent 153s. runs 122 in eight and best of 125. why sacrifice mph if ya dont have to? lower the bike as much as possible and set up the rear shock. good luck

Are you running those numbers on a SWB '08 Busa or do you have motor work (impressive either way) but the MPH-125/155 is close to what my "built" SWB 00 does !

portagee · « **Reply #31 on:** March 26, 2009, 07:21:13 PM »

stock wb,and engine. brock pipe,pc,lowered,strapped,catalyst seat. it ran the 125mph and 155 with one tooth down in the front but i changed it back to stock gearing cause it was just to hard to not wheelie and i was going through traps in the middle of 5th gear,stock gearing it goes through with shift light on in fourth every time. those were numbers that happened on a perfect day,pump gas too! weather is getting better here and our track is at 65' so getting mr11 for the next couple weekends of testing,hoping for a teen now with an air shifter and race gas.

Zmydust · « **Reply #32 on:** March 27, 2009, 02:35:28 PM »

I'm 185 suited , 08 with pipe/pc/arm 93 pump gas runs 153-155mph every pass .

sprinta · « **Reply #33 on:** April 06, 2009, 02:27:11 PM »

first runs this year for me at the weekend, stock gearing, stock wheelbase, lowered, Shinko, Yoshi R77 + PC3USB, 190rwhp + 112lb.ft.

6 runs all told, 10.2,10.00, 9.99, 9.88, 9.82, + best of 9.75 @ 146 , crossing the line topped out in 4th,

240 in boots and suit

Pat Dietrich · « **Reply #34 on:** April 06, 2009, 08:52:38 PM »

Quote from: Zmydust on March 27, 2009, 02:35:28 PM

I'm 185 suited , 08 with pipe/pc/arm 93 pump gas runs 153-155mph every pass .

Thinkin about a new 09. What kind of numbers are these new busa getting on the dyno with brocks pipe? Havent really read much about the gen2.

Zmydust · « **Reply #35 on:** April 06, 2009, 09:06:10 PM »

Mine made 188hp (not a happy dyno) 64", shinko, alien head brocks pipe, and PC

Pat Dietrich · « **Reply #36 on:** April 08, 2009, 11:01:22 AM »

Quote from: Zmydust on April 06, 2009, 09:06:10 PM

Mine made 188hp (not a happy dyno) 64", shinko, alien head brocks pipe, and PC

Thanks. Thats probably 220 then on a happy dyno!

justbrad · « **Reply #37 on:** April 13, 2009, 02:28:28 PM »

Quote from: Zmydust on April 06, 2009, 09:06:10 PM

Mine made 188hp (not a happy dyno) 64", shinko, alien head brocks pipe, and PC

Yo Jonathon you still live in Jackson?

Zmydust · « **Reply #38 on:** April 13, 2009, 02:32:26 PM »

Yes sir I do

justbrad · « **Reply #39 on:** April 13, 2009, 02:41:13 PM »

I lived there for thirty years before moving to Alaska in april of 06. Is the economy still shite around there? I'm had my fun in the snow but I miss riding bikes. This Alaska is one of the most beautiful places I have ever experienced but I miss certain things about the lower forty eight that arent available here. roadtrips, concerts, girls in bikinis

Ready to leave AK but not too sure I wanna return to Jackson. Kinda over it with that scene. I actually met you one night at Hooters back in 05 I think. Do they still do bike night there? I remember it used to be run by the Harley guys and then the sportbikes ran em all out. We used to have some big turnouts, even if it was mostly squids that liked to "park and b.s." more than ride.

soNso · « **Reply #40 on:** April 19, 2009, 06:01:19 AM »

Quote from: Pat Dietrich on April 08, 2009, 11:01:22 AM

Quote from: Zmydust on April 06, 2009, 09:06:10 PM
Mine made 188hp (not a happy dyno) 64", shinko, alien head brocks pipe, and PC

Thanks. Thats probably 220 then on a happy dyno!

Pat i've been hearing mid eighty..

SKILLZ · « **Reply #41 on:** April 19, 2009, 09:56:01 PM »

Made some passes on my 08 today PC, Ti Force, no filter lowered and strapped, stock length..... Best pass I made was a 9.55@148 1.67 60' Best 60' was a 1.63 . Air was horrible.... Hoping to have my extensions next week and get some deep 9's. I was running the stock clutch and not modified... Might go ahead and weld the hub and put the heavy springs on once i get the extensions.

portagee · « **Reply #42 on:** April 20, 2009, 06:55:27 PM »

definitely fix that clutch. once i put the slave support and put about 10lb heavier springs i stopped ruining clutches and stopped losing mph. with stock springs i would get about 10 good passes and then would lose 1-3 mph

6002abusa · « **Reply #43 on:** September 12, 2009, 12:04:45 PM »

Bike/rider 770#. Tons of Baytown humidity. About 85% @ 85deg. at 10 PM.
.244
1.70
4.291
6.372
118.93
8.180
9.714
146.85

I have been doing more MPH with a slower pass. I usually run 148.?? Im slow, but steadily getting faster.

8secbusa · « **Reply #44 on:** September 28, 2009, 03:42:57 AM »

220lbs, stock wheelbase, pipe & PC.
9.33 at 149mph.

Started in the 9.9 range, practice, practice, and practice got me faster..

soNso · « **Reply #45 on:** September 28, 2009, 02:31:47 PM »

8sec. that practicing has payed off. you'll be in 8's soon no doubt...

6002abusa · « **Reply #46 on:** September 29, 2009, 01:08:40 AM »

9.53 update

bikefrk · « **Reply #47 on:** September 29, 2009, 06:01:14 PM »

Ran a 9.31@153mph on a 20 shot with pipe and no tune. SWB on the lowest dogbone hole.

6002abusa · « **Reply #48 on:** October 19, 2009, 11:49:37 AM »

9.50 update. I was in the 1.5X 60' , but slipped back into the low 1.60 range and ran a 9.50 with a stiff head wind at 145mph.

BusaBear · « **Reply #49 on:** October 22, 2009, 12:36:42 AM »

no 1/4 mile track near but on the 1/8 im running 6.9-7.1 take n effect im 6-1, 392lbs mods r full brocks mega exhaust,k&n air filter, lowered, and ecu flashed..

News:

Author Topic: What is everybody running in the 1/4 (Read 22247 times) Tweet