Haybusa Parts and Service Member Support

Author Topic: Oil smoke, valve seals changed  (Read 1614 times)

Offline prosb

  • Rider
  • ***
  • Posts: 85
  • Gender: Male
Oil smoke, valve seals changed
« on: August 04, 2008, 07:03:01 AM »
I just can't figured out what is wrong with this.

Bike was smoking a minute or two after start. Knew that valve seals were broken. Changed them (OEM) and still smokes after start. After night I checked with a flashlight through the intake and all valves was covered with oil and so was pistons too. Just intake valves.

Bike won't smoke longer than a minute. No smoking when rev it up nor when driving it. So I assume that there is still valve guide seal problem. Sooo embarrassing when I warm up the engine at pit. :oops:
gsxr 1000 258rwhp@15psi